Manufacturers Suppliers India

Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world..

The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Home--------Contact/E-mail

Shipping By Sea Bulk Jumbo Packing Palletized and Shrink Wrapped Drum Packing Air Freighting Liquid Pack Drum Pallets Export Import Supply

Benzyl Alcohol Manufacturers, SDS MSDS Sheet

Benzyl Alcohol BP USP NF IP FCC ACS Grade Manufacturers

Benzyl Alcohol SDS MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Synonyms: Benzenecarbinol; benzenemethanol; alpha-hydroxytoluene; Phenylmethyl alcohol; Phenyl carbinol
CAS No.: 100-51-6
EINECS EC-No.: 202-859-9
Molecular Weight: 108.14
Chemical Formula: C6H5CH2OH

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Oral Category 4, H302
Acute toxicity, dermal Category 4, H312
Skin corrosion/irritation Category 2, H315
Acute toxicity, inhalation Category 4, H332
Hazardous to the aquatic environment, acute hazard Category 2, H401

Labeling according Regulation (EC) No 1272/2008

GHS Label Elements
Irritant
Irritant

Signal Words: Warning

Hazard statements:
H302: Harmful if swallowed.
H312: Harmful in contact with skin.
H315: Causes skin irritation.
H332: Harmful if inhaled.
H401: Toxic to aquatic life.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get Medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+352: IF ON SKIN: Wash with soap and water.
P332+313: If skin irritation occurs: Get medical advice/attention.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P330: Rinse mouth.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.
P501 Dispose of contents/ container to an approved waste disposal plant.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xn Harmful R20/22
For the full text of the H-statements and R-phrases mentioned in this Section, see Section 16.

3. Composition/Information on Ingredients

Ingredient: Benzyl Alcohol
CAS No.: 100-51-6
EINECS EC-No.: 202-859-9

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention.

5. Fire Fighting Measures

Fire: Flash point: 93C (199F)
Auto ignition temperature: 436C (817F). Combustible. High heat or direct flame is necessary to cause ignition.
Explosion: Above the flash point, explosive vapor-air mixtures may be formed.
Fire Extinguishing Media: Dry chemical, foam or carbon dioxide. Do not use a solid stream of water, since the stream will scatter and spread the fire. Water spray may be used to keep fire exposed containers cool.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Small Spill: Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Benzyl Alcohol is Combustible material. Keep away from heat. Keep away from sources of ignition. Stop leak if without risk. Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

7. Handling and Storage

Protect against physical damage. Outside or detached storage is preferred. Inside storage should be in a standard flammable liquids storage room or cabinet. Separate from oxidizing materials. Storage and use areas should be No Smoking areas. Containers of Benzyl Alcohol may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: AIHA Workplace Environmental Exposure Level (WEEL):10 ppm, 8-hour, TWA
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist. For emergencies, or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: Clear, colorless liquid.
Odor: Faint aromatic odor.
Solubility: 1g/25ml water @ 17C
Specific Gravity: 1.05 @ 20C/4C
pH: No information found.
% Volatile by volume @ 21C (70F): 100
Boiling Point: 205C (401F)
Melting Point: -15C (5F)
Vapor Density (Air=1): 3.72
Vapor Pressure (mm Hg): 0.15 @ 25C (77F)
Evaporation Rate (BuAc=1): 1.8 (Ether = 1)

10. Stability and Reactivity

Stability: Benzyl Alcohol is stable under ordinary conditions of use and storage. Undergoes slow oxidation in the presence of air or oxygen to form benzaldehyde and benzoic acid.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide may form when heated to decomposition.
Hazardous Polymerization: When heated past 100C, Benzyl Alcohol containing hydrogen bromide and dissolved iron may polymerize with a rapid increase in temperature.
Incompatibilities: Acids, oxidizing agents, and aluminum. Will attack some plastics.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.

11. Toxicological Information

Oral rat LD50: 1230 mg/kg
LD50 Oral - Rat - male - 1.620 mg/kg
Skin rabbit LD50: 2000 mg/kg; irritation, skin rabbit, standard Draize, 100 mg/24-hour, open, moderate.
Mutagenic Effects: Mutagenic for bacteria and/or yeast.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.

12. Ecological Information

Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Environmental Fate: When released into the soil, this material is expected to leach into groundwater. When released into the soil, this material may evaporate to a moderate extent. When released into the soil, this material may biodegrade to a moderate extent. When released into water, this material is not expected to evaporate significantly. When released into water, this material may biodegrade to a moderate extent. This material has an estimated bio concentration factor (BCF) of less than 100. This material is not expected to significantly bio accumulate. When released into the air, this material is expected to be readily degraded by reaction with photo chemically produced hydroxyl radicals. When released into the air, this material is expected to have a half-life between 1 and 10 days. When released into the air, this material may be removed from the atmosphere to a moderate extent by wet deposition.
Toxicity to fish LC50 - Lepomis macrochirus (Bluegill): 10 mg/l - 96 h
LC50 - Pimephales promelas (fathead minnow): 460 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates:
EC50 - Daphnia magna (Water flea) - 55 mg/l - 24 h
- Daphnia magna (Water flea) - 230 mg/l - 48 h
Environmental Toxicity: The LC50/96-hour values for fish are from 10 to over 100 mg/l. This material may be toxic to aquatic life.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

14. Transport Information

DOT: Not regulated.
IMDG: Not regulated.
IATA: Not regulated.
Canada TDG hazard class: Not regulated.
Europe ADR/RID hazard class: Not regulated.
ICAO/IATA (air) hazard class: Not regulated.

15. Regulatory Information

USA:
Chemical Weapons Convention
: No; TSCA 12(b): No; CDTA: No
SARA 311/312: Acute: Yes; Chronic: Yes; Fire: Yes; Pressure: No; Reactivity: No  (Pure / Liquid)
SARA 302 Extremely Hazardous Substance: None present or none present in regulated quantities.
SARA 304 Emergency Release Notification: None present or none present in regulated quantities.
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
CERCLA: No chemicals in this material with known CAS numbers are subject to the reporting requirements of CERCLA
SARA 313 (TRI Reporting): None present or none present in regulated quantities.
Clean Water Act Section 311 Hazardous Substances (40 CFR 117.3): None present or none present in regulated quantities.
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130): None present or none present in regulated quantities.
USA State Regulations
US California Proposition 65: No ingredient regulated by CA Prop 65 present.
US New Jersey Worker and Community Right-to-Know Act: No ingredient regulated by NJ Right-to-Know Law present.
US. Massachusetts RTK: Substance List: BENZYL ALCOHOL, Listed
US. Pennsylvania RTK: Hazardous Substances: BENZYL ALCOHOL, Listed
US. Rhode Island RTK: No ingredient regulated by RI Right-to-Know Law present.
Canada WHMIS:
CLASS B-3: Combustible liquid with a flash point between 37.8°C (100°F) and 93.3°C (200°F). CLASS D-2B: Material causing other toxic effects (TOXIC).

16. Other Information

EINECS EC-No.: 202-859-9
H302 = Harmful if swallowed.
H312 = Harmful in contact with skin.
H315 = Causes skin irritation.
H332 = Harmful if inhaled.
H401 = Toxic to aquatic life.
Xn = Harmful
R20/22 = Harmful by inhalation and if swallowed.

Disclaimer:

***************************
Our company provides this  Benzyl Alcohol SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Benzyl Alcohol MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
***************************

Benzyl Alcohol Manufacturers:

MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.

e-mail: info@mubychem.com

Old Spice: Manufacturing since more than Three Decades:-
Ammonium Chloride Sodium Acetate
Calcium Chloride Sodium Diacetate
Magnesium Chloride Sodium Thiosulfate
Potassium Chloride Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals-
Ammonium Chloride Zinc Chloride
Calcium Chloride Boric Acid
Calcium Phosphate Calcium Oxide
Gentian Violet Chromic Chloride
Manganese Sulfate Magnesium Sulfate
Potassium Acetate Maleic Acid
Sodium Phosphate Sodium Acetate
Sodium Propionate Sodium Thiosulfate
Benzyl Alcohol Borax; Sodium Borate
Calcium Hydroxide Calcium Sulfate
Calcium Saccharate Citric Acid
Magnesium Chloride Manganese Chloride
Methylene Blue Potassium Chloride
Potassium Phosphate Sodium Bicarbonate
Sodium Hydroxide  
Other Best Seller Products:
Ammonium Persulfate Sodium Chloride
Ammonium Phosphate Sodium Formate
Aluminum Chloride Sodium Monochloro Acetate
Barium Chloride Sodium Propionate
Calcium Nitrite Nitrate Sodium Phosphate
Ceric Ammonium Nitrate Butylated Hydroxyanisole
Calcium Propionate Butylated Hydroxytoluene
Cupric Chloride Tertiary Butylhydroquinone
Ferrous Sulfide Isatoic Anhydride
Magnesium Sulfate Zinc Sulphate
Potassium Iodide Zinc Ammonium Chloride Galvanizing Flux
Potassium Bromide Methyl & Dimethyl Anthranilate
Potassium Phosphate Ammonical Etchant
Potassium Nitrate Nitrite Potassium Phthalimide
Sodium Formaldehyde Bisulfite Oil Field Chemicals
Sodium Bromide Calcium-Magnesium Acetate
Sodium Butyrate Isatoic Anhydride & Derivatives
Sodium Nitrite Nitrate  

Benzyl Alcohol BP USP ACS IP Manufacturers

Global or International Benzyl Alcohol Suppliers, Exporters, Importers, Manufacturers