Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world..
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Potassium Phosphate Monobasic Monopotassium Phosphate Manufacturers, SDS MSDS Sheet
Monobasic Potassium Phosphate Monobasic Manufacturers BP USP NF Monopotassium Phosphate Manufacturers
Dibasic Potassium Phosphate Dibasic Manufacturers BP USP NF Dipotassium Phosphate Manufacturers
Tribasic Potassium Phosphate Tribasic Manufacturers BP USP NF Tripotassium Phosphate ManufacturersPotassium Phosphate Monobasic Monopotassium Phosphate SDS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Phosphoric acid monopotassium salt; Potassium dihydrogen phosphate; Mono Potassium Phosphate
CAS No.: 7778-77-0
EINECS EC Number: 231-913-4
Molecular Weight: 136.09
Chemical Formula: KH2PO42. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
NoneSignal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.3. Composition/Information on Ingredients
Ingredient: Monopotassium Phosphate or Mono Potassium Phosphate or Monobasic Potassium Phosphate Monobasic
EINECS EC Number: 231-913-4
CAS No.: 7778-77-0
Percent: 99 - 100%4. First Aid Measures
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: If Mono Potassium Phosphate is swallowed, give several glasses of water to drink to dilute. If large amounts were swallowed or symptoms occur, get medical advice. Never give anything by mouth to an unconscious person.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.5. Fire Fighting Measures
Fire: Not considered to be a fire hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding.
Special Information: In the event of a fire over Monopotassium Phosphate, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.6. Accidental Release Measures
Ventilate area of leak or spill of Mono Potassium Phosphate. Wear appropriate personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Avoid breathing dust.
Spills: Pick up and place in a suitable container for reclamation or disposal, using a method that does not generate dust. Do not let product enter drains.7. Handling and Storage
Provide appropriate exhaust ventilation at places where dust is formed. Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of Monobasic Potassium Phosphate may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. The material is Hygroscopic.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established for Monopotassium Phosphate.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Safety glasses. Maintain eye wash fountain and quick-drench facilities in work area of Monopotassium Phosphate.9. Physical and Chemical Properties
Appearance: It is white granular powder.
Odor: Odorless.
Solubility: It is soluble 22 g in 100 g of water.
Density: Specific gravity of 2.34
% Volatile by volume @ 21C (70F): 0
Boiling Point: 400C (752F) Loses water and becomes metaphosphate
Melting Point: 253C (487F)10. Stability and Reactivity
Stability: Mono Potassium Phosphate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents.
Conditions to Avoid: Exposure to moisture.11. Toxicological Information
LD50 Oral - Rat - > 2.000 mg/kg
LD50 Dermal - Rabbit - > 4.640 mg/kg
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Monopotassium Phosphate container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
DOT & ADR/RID: Not regulated.
IMDG: Not regulated.
IATA: Not regulated.15. Regulatory Information
USA:
TSCA 12(b): Not applicable
SARA 313: Not applicable
SARA 311/312 Hazardous Categorization: None
CERCLA: Not applicable
California Proposition 65: This product does not contain any Proposition 65 chemicalsCanada WHMIS: Not controlled under WHMIS (Canada).
16. Other Information
Disclaimer:
***************************
Our company provides this MONO POTASSIUM PHOSPHATE MONOBASIC or MONOPOTASSIUM PHOSPHATE SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This MONOBASIC POTASSIUM PHOSPHATE MONOBASIC or MONOPOTASSIUM PHOSPHATE MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
***************************Monobasic Potassium Phosphate Manufacturers
Potassium Phosphate Monobasic Manufacturers
Monopotassium Phosphate manufacturers:MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.e-mail: info@mubychem.com
Global or International Monobasic Potassium Phosphate Monobasic or Monopotassium Phosphate BP USP NF FCC ACS Food Grade Suppliers, Exporters, Importers, Manufacturers