|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Potassium Hydroxide Pellets Manufacturers, MSDS Sheet
Potassium Hydroxide Pellets Manufacturers USP BP IP ACS FCC
Potassium Hydroxide SDS MSDS Sheet, Material Safety Data Sheet
Section 1: Product Identification
Synonyms: Caustic Potash or Potassium Hydroxide Solid, Flakes, Pellets.
CAS No.: 1310-58-3
EINECS EC Number: 215-181-3
Molecular Weight: 56.11
Chemical Formula: KOH
Section 2: Hazard Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Corrosive to Metals Category 1
Acute toxicity, oral Category 4
Skin corrosion/irritation Category 1A, B, C
Hazardous to the aquatic environment, acute hazard Category 3
Labeling according Regulation (EC) No 1272/2008
GHS Label Elements  Corrosive |
Signal Words: Danger
Hazard statements:
H290: May be corrosive to metals
H302: Harmful if swallowed
H314: Causes severe skin burns and eye damage
H402: Harmful to aquatic life
Precautionary statements:
P234: Keep only in original container.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P390: Absorb spillage to prevent material damage.
P404: Store in a closed container.
P405: Store locked up.
P501: Dispose of contents/container to authorized agents only.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
C Corrosive
R-22 Harmful if swallowed.
R35 Causes severe burns.
Section 3: Composition / Information on Ingredients
Ingredient: Potassium Hydroxide Pellets
CAS No.: 1310-58-3
EINECS EC Number: 215-181-3
Percent: 85 - 100%
Section 4: First Aid Measures
Always seek medical attention after first aid measures are provided.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eye with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention immediately.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Call a physician, immediately. Wash clothing before reuse..
Ingestion: If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to and unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately.
Medical Conditions generally Aggravated by Exposure: Repeated exposure of the eyes to a low level of Potassium hydroxide dust can produce eye irritation. Repeated skin exposure can produce local skin destruction, or dermatitis. Repeated inhalation of dust can produce varying degree of respiratory irritation or lung damage.
Section 5: Fire Fighting Measures
Flash Point: NA
Fire Extinguishing Media: Adapt extinguishing media to the environment. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special Fire Fighting Procedures: Wear self contained breathing apparatus for firefighting if necessary.
Unusual Fire and Explosion Hazards: Flammable hydrogen gas may be produced on prolong contact with metals such as aluminum, tin lead and zinc.
Hazardous combustion products: Oxides of Potassium.
Section 6: Accidental Release Measures
Steps to be Taken in Case Material is Released or Spilled: Evacuate the area of all unnecessary personnel. Wear suitable protective equipment. Eliminate any ignition sources until the area is determined to be free from explosion or fire hazards. Contain the release and eliminate its source, if this can be done without risk. Take up and containerize for proper disposal. Comply with local, state and Federal regulations on reporting releases. Refer to regulatory information for reportable quantity and other regulatory data.
Methods for cleaning up: Take up liquid spill into absorbent material, e.g.: dry sand/earth or powdered limestone. Scoop absorbed substance into closing containers. Carefully collect the spill/leftovers. Small quantities of liquid spill may be neutralize with acid solution. Wash away neutralized product with plentiful water. Clean contaminated surfaces with an excess of water. Take collected spill to manufacturer/competent authority. Wash clothing and equipment after handling.
Waste Disposal Methods: Dispose of waste according to Federal, State and Local Regulations.
Section 7: Handling and Storage
Keep Potassium hydroxide Pellets in a tightly closed original container. Protect from physical damage. Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities. Always add the caustic to water while stirring; never the reverse. Containers of Potassium hydroxide may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Do not store with aluminum or magnesium. Do not mix with acids or organic materials.
Section 8: Exposure Controls / Personal Protection
Components with workplace control parameters
Derived No Effect Level (DNEL):
Application Area: Workers & Consumers
Exposure routes: Inhalation
Health effect Value, Long-term local effects: 1 mg/m3
USA ACGIH: 2 mg/m³ ACGIH Ceiling (mg/m³)
USA OSHA: 2 mg/m³
Engineering Controls Ventilation required: Potassium hydroxide should be handled or transferred in an approved fume hood or with adequate ventilation.
Personal Protection Equipment
Respiratory protection: If workplace exposure limit (s) of product or any component is exceeded (see TLV/PEL), a NIOSH/MSHA approved air supplied respirator is advised in absence of proper environmental control. OSHA regulations also permit other NIOSH/MSHA respirator (negative pressure type) under specified conditions (see your safety equipment supplier). Engineering and/or administrative controls should be implemented to reduce exposure.
Protective gloves: Nitrile or equivalent.
Skin protection: Impervious, protective clothing.
Eye protection: Safety glasses with side shields must be worn at all times.
Additional clothing and/or equipment: Eyewash and safety equipment should be readily available.
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Section 9 Physical and Chemical Properties
Appearance: Potassium Hydroxide is white deliquescent solid
Odor: Odorless.
Solubility: 52.8% in water @ 20C (68F)
Specific Gravity: 2.04
pH: 13.5 (0.1 molar solution)
Boiling Point: 1320C (2408F)
Melting Point: 360C (680F)
Vapor pressure: 0.1 kPa (714 °C)
Molecular Weight: 56.11
Chemical Formula: KOH
Section 10: Stability and Reactivity
Stability: Potassium hydroxide is stable under ordinary conditions of use and storage. Very hygroscopic. Absorbs atmospheric CO2.
Reactivity: Exothermic reaction with water. Heat of solution is very high, and with limited amounts of water, violent boiling may occur. Violent exothermic reaction with strong acids. Reacts with some metals to release hydrogen.
Conditions to Avoid: Contact with moisture may generate sufficient heat to ignite surrounding combustible material.
Materials to Avoid (Incompatibility): Water, acids, chlorinated hydrocarbons, oxidizing agents, metals and organic materials, Nitro compounds, Organic materials, Magnesium, Copper, Water, reacts violently with:, Metals, Light metals, Contact with aluminum, tin and zinc liberates hydrogen gas. Contact with nitromethane and other similar nitro compounds causes formation of shock-sensitive salts., vigorous reaction with:, Alkali metals, Halogens, Azides, Anhydrides
Hazardous Polymerization: Will not occur.
Section 11: Toxicological Information
Potassium hydroxide is corrosive to all tissues. It is a severe eye, skin, and respiratory tract irritant, and can burn any tissue with which it comes in contact. Contact with eye may cause redness, intense pain, and tearing. In severe cases, conjunctival edema and destruction of cornea may occur, which may result in permanent damage to the eye. Potassium hydroxide is a severe skin irritant, and contact with the skin can cause effects ranging from irritation to burns with deep and painful lesions. Burns may not be immediately painful. The onset of pain after contact may take minutes to hours; however, damage begins immediately.
Extremely hazardous in case of eye contact ( corrosive). Causes severe eye burns. Extremely hazardous in case of skin contact (corrosive). Skin contact produces severe burns. Hazardous in case of skin contact (permeator). Extremely hazardous in case of inhalation (lung corrosive). Hazardous in case of inhalation. Extremely hazardous in case of ingestion. May be fatal if swallowed. This product does not contain any compounds listed by NTP or IARC or regulated by OSHA as a carcinogen.
Results of component toxicity test performed:
LD50 Oral - Rat - 333 mg/kg
LD50 Skin-Rabbit - 1260 mg/kg
This product is not classifiable as to its carcinogenicity based on its IARC, ACGIH, NTP, or EPA classification.
Section 12: Ecological Information
Toxicity to fish:
Toxicity to fish: LC50 Gambusia affinis (Mosquito fish): 80 mg/l; 96 h (IUCLID)
Toxicity to bacteria: EC50 Photobacterium phosphoreum; 15 min
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Expected to be highly toxic to aquatic organisms and ecosystems due to effects on pH. Harmful effect due to pH shift. Forms corrosive mixtures with water even if diluted.
Section 13 Disposal Considerations
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging must be disposed of as unused product.
Section 14: Transportation Information
US DOT & ADR/RID:
Proper shipping name: Potassium Hydroxide, solid
Hazard Class: 8
Packaging group: II
UN Number: UN1813
IATA:
Proper shipping name: Potassium Hydroxide, solid
Hazard Class: 8
Packing group: II
UN Number: UN1813
IMO:
Proper shipping name: Potassium Hydroxide, solid
Class: 8
UN Number: UN1813
Packing group: II
Section 15: Regulatory Information
USA:
TSCA Inventory: Listed
Sara 311/312: Immediate Health Hazard, Chronic Health Hazard
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
States: Potassium Hydroxide appear on the following state hazardous substances lists: CA FL MA MN NJ PA
California Prop 65 Components: This product does not contain any chemicals known to the State of California to cause cancer, birth, or any other reproductive defects.
Canada WHMIS: CLASS E: Corrosive solid. D1B Toxic materials
DSL: All components of this product are on the Canadian DSL.
Section 16: Other Information
EINECS EC Number: 215-185-5
C Corrosive
R-22 Harmful if swallowed.
R35 Causes severe burns.
H290: May be corrosive to metals
H302: Harmful if swallowed
H314: Causes severe skin burns and eye damage
H402: Harmful to aquatic life
Disclaimer:
***************************
Our company provides this Potassium Hydroxide SDS information
sheet contained herein in good faith but makes no representation as to its
comprehensiveness or accuracy. This Potassium Hydroxide MSDS sheet is
intended only as a guide to the appropriate precautionary handling
of the material by a properly trained person using this product.
Individuals receiving the information must exercise their independent
judgment in determining its appropriateness for a particular purpose.
***************************
Potassium Hydroxide Pellets Manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
