|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Potassium Phthalimide Manufacturers, SDS MSDS Sheet
Potassium Phthalimide Manufacturers
Potassium phthalimide Hexahydrate SDS MSDS Sheet, Material Safety Data Sheet Phthalimide Potassium Derivative
1. Product Identification
Synonyms: 1,3-Dihydro-1,3-dioxoisoindolepotassium salt; Phthalimide potassium salt; Phthlimide; Phthalimidopotassium; Potassium phthalimide; Phthalimide potassiu; n-potassiophthalimide.
CAS No.: 1074-82-4
EINECS: EC Number: 214-046-6
Molecular Weight: 185.2 g/mol
Chemical Formula: C8H4KNO2
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements None |
Signal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Ingredient: Potassium phthalimide
CAS No.: 1074-82-4
EINECS: EC Number: 214-046-6
Percent: 97 - 100%
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Flammability of the Product: The product is combustible at high temperature.
Products of Combustion: It forms oxides of carbon nitrogen and toxic gases when heated to decomposition. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Explosion: Not known.
Fire Extinguishing Media: Use water spray, dry chemical, foam, or carbon dioxide.
Special Information In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water and swab.
7. Handling and Storage
Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage or contact with oxidizing material and combustible substances. Avoid moisture and store away from water sources.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: It is white to slightly yellow coloured crystals or powder.
Odor: Odorless
Solubility: Soluble in water.
pH: -
Molecular Weight: 185.2
Molecular Formula: C8H4KNO2
Boiling Point: NA
Melting Point: >300C
10. Stability and Reactivity
Stability: Potassium phthalimide is stable under recommended conditions of use and storage.
Hazardous Decomposition Products: It produces oxides of carbon nitrogen along with toxic fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: It is incompatible with water including moisture, heat, oxidizing material, strong acids & alkalis.
Conditions to Avoid: Moisture, Heat, Sun light, Incompatibles.
11. Toxicological Information
Toxicity to Animals:
Oral, mouse: LD50 = NA
Oral, rat: LD50 = NA
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
12. Ecological Information
Environmental Toxicity:
Toxicity to fish: No data found
BOD5 and COD: Not available.
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Potassium phthalimide in accordance with federal, state and local requirements.
14. Transport Information
DOT (USA) & ADR/RID: Not Regulated.
IMDG: Not Regulated.
IATA: Not Regulated.
15. Regulatory Information
USA:
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
Section 313: No chemicals are reportable under Section 313.
SARA 311/312 Hazards: None.
TSCA: TSCA 8(b) inventory: Phthalimide, Potassium Derivative.
CERCLA Hazardous Substances and corresponding RQs: None of the chemicals in this material have an RQ.
California Prop 65: Not listed.
WHMIS (Canada): Not controlled under WHMIS (Canada).
CAS# 1074-82-4 is listed on Canada's NDSL List.
CAS# 1074-82-4 is not listed on Canada's Ingredient Disclosure List.
Section 16 - Additional Information
16. Other Information
Disclaimer:
***************************
Our company provides this Potassium phthalimide SDS sheet in good faith but
makes no representation as to its comprehensiveness or accuracy. This Potassium phthalimide MSDS sheet is intended only as a guide to the appropriate
precautionary handling of the material by a properly trained person using this
product. The above information has been compiled from various sources and has
the possibility of discrepancy and being out-dated information. Individuals
receiving the information must exercise their independent judgment and do
further search in determining its appropriateness for a particular purpose. In
no case shall our company be liable to loss or damages by the product user.
***************************
Potassium Phathalimide Manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
