Manufacturers Suppliers India

Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world..

The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Home--------Contact/E-mail

Shipping By Sea Bulk Jumbo Packing Palletized and Shrink Wrapped Drum Packing Air Freighting Liquid Pack Drum Pallets Export Import Supply

Potassium Alum, Aluminum Potassium Sulfate, Potash Alum Manufacturers, SDS MSDS Sheet

Potassium Alum, Potash Alum, Aluminum Potassium Sulfate USP BP IP ACS Analytical Reagent FCC Food Grade Manufacturers

Potassium Alum SDS MSDS Sheet, Material Safety Data Sheet Aluminium Potassium Sulphate

1. PRODUCT DESCRIPTION

Product Name: Potassium alum, Potash alum, Aluminum potassium sulphate dodecahydrate, Potassium aluminum sulphate dodecahydrate.
CAS Number: 7784-24-9
EINECS EC Number: 233-141-3
Molecular Formula: AlK(SO4)2.12H2O
Molecular Weight: 474.39

2. HAZARD IDENTIFICATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling as per GHS & Regulation EC 1272/2008 (CLP) & GHS

GHS Label Elements
None

Signal Words: None

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

HMIS (Perceived): Health hazard: 0, Flammability: 0, Physical hazards: 0
NFPA (Perceived): Health hazard: 0, Fire: 0, Reactivity Hazard: 0

3. COMPOSITION/INFORMATION ON INGREDIENTS

Product Name: Potassium Alum
CAS Number: 7784-24-9
EINECS EC Number: 233-141-3
Percentage: 95-100%

4. FIRST AID MEASURES

Always get medical attention after the first aid is over.
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If Potassium Alum is swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention.

5. FIREFIGHTING PROCEDURES

Extinguisher Media: Use media suitable to extinguish surrounding fire. Oxides of Sulfur Aluminium and Potassium may arise on decomposition.
Flammable Limits in Air % by Volume: N/A
Special Fire fighting Procedures: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus.

6. SPILL OR LEAK PROCEDURES

Steps to be taken in Case Potassium Alum is Released or Spilled: Avoid dust formation. Avoid breathing vapors, mist or gas. Ventilate area of leak or spill. Wear appropriate personal protective equipment. Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue may be flushed to sewer with plenty of water.

7. SPECIAL PRECAUTIONS

Keep Potassium Alum in a well closed container stored under cold to warm conditions. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

8. SPECIAL PROTECTION INFORMATION

Contains no substances with occupational exposure limit values.
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation Local Exhaust: Yes
Eye Protection: Splash proof chemical safety goggles should be worn at all times.
Other Protective Clothing or Equipment: Lab apron, eye wash, and safety shower.

9. PHYSICAL DATA

Molecular Formula: AlK(SO4)2.12H2O
Molecular Weight: 474.39
Appearance and Odor: Potassium Alum is white crystalline powder or granules, odorless.
pH: >3
Melting Point: 92-93C.
Boiling Point: NA
Density: 1.76 g/cm3 at 20 °C
Percent Volatile by Volume: 0 (21C)
Solubility in Water: Soluble in water.

10. REACTIVITY DATA

Stability: Potassium Alum is stable
Conditions to Avoid: Heat, humidity
Incompatibility (Materials to Avoid): Strong oxidizing agents.
Hazardous Decomposition Products: Sulphur, Aluminium & Potassium oxide
Hazardous Polymerization: Will not occur.

11. TOXICITY DATA

Toxicity Data: Not available.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, NTP, ACGIH & OSHA.

12. ECOLOGICAL DATA

Toxicity to fish: Not available.
Bioaccumulative potential: Does not bioaccumulate.
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. DISPOSAL INFORMATION

Waste Disposal Methods: Dispose Potassium Alum in accordance with all applicable Federal, State and Local regulations.

14. TRANSPORT INFORMATION

DOT (USA) & ADR/RID: Not regulated.
IMDG: Not regulated.
IATA: Not regulated.

15. REGULATORY INFORMATION

USA:
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Canada WHMIS: Not Listed

Disclaimer:
***************************
Our company provides this  Potassium Alum or Aluminum Potassium Sulfate SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Potash Alum Potassium Alum or Aluminum Potassium Sulphate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
***************************

Potash Alum Potassium Alum manufacturers
Aluminum Potassium Sulfate Sulphate Manufacturers at:

MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.

e-mail: info@mubychem.com

Old Spice: Manufacturing since more than Three Decades:-
Ammonium Chloride Sodium Acetate
Calcium Chloride Sodium Diacetate
Magnesium Chloride Sodium Thiosulfate
Potassium Chloride Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals-
Ammonium Chloride Zinc Chloride
Calcium Chloride Boric Acid
Calcium Phosphate Calcium Oxide
Gentian Violet Chromic Chloride
Manganese Sulfate Magnesium Sulfate
Potassium Acetate Maleic Acid
Sodium Phosphate Sodium Acetate
Sodium Propionate Sodium Thiosulfate
Benzyl Alcohol Borax; Sodium Borate
Calcium Hydroxide Calcium Sulfate
Calcium Saccharate Citric Acid
Magnesium Chloride Manganese Chloride
Methylene Blue Potassium Chloride
Potassium Phosphate Sodium Bicarbonate
Sodium Hydroxide  
Other Best Seller Products:
Ammonium Persulfate Sodium Chloride
Ammonium Phosphate Sodium Formate
Aluminum Chloride Sodium Monochloro Acetate
Barium Chloride Sodium Propionate
Calcium Nitrite Nitrate Sodium Phosphate
Ceric Ammonium Nitrate Butylated Hydroxyanisole
Calcium Propionate Butylated Hydroxytoluene
Cupric Chloride Tertiary Butylhydroquinone
Ferrous Sulfide Isatoic Anhydride
Magnesium Sulfate Zinc Sulphate
Potassium Iodide Zinc Ammonium Chloride Galvanizing Flux
Potassium Bromide Methyl & Dimethyl Anthranilate
Potassium Phosphate Ammonical Etchant
Potassium Nitrate Nitrite Potassium Phthalimide
Sodium Formaldehyde Bisulfite Oil Field Chemicals
Sodium Bromide Calcium-Magnesium Acetate
Sodium Butyrate Isatoic Anhydride & Derivatives
Sodium Nitrite Nitrate  

Potash Alum Potassium Alum Aluminum Potassium Sulfate Aluminium Potassium Sulphate BP USP FCC Food grade ACS Manufacturers

Global or International Potassium Alum or Potash Alum or Aluminum Potassium Sulphate Aluminium Potassium Sulphate Suppliers, Exporters, Importers, Manufacturers

Potash Alum BP Aluminium Potassium Sulphate BP Potassium Alum Aluminum Potassium Sulfate USP ACS Analytical reagent FCC Food grade manufacturers