Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world..
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Zinc Sulfate Zinc Sulphate Manufacturers, SDS MSDS Sheet
Zinc Sulphate Commercial Grade Manufacturers
Zinc Sulfate BP USP ACS IP FCC Food Grade ManufacturersZinc Sulphate SDS MSDS, Material Safety Data Sheet
SECTION 1. PRODUCT IDENTIFICATION
Product Identity: ZINC SULFATE. It comes as heptahydrate, monohydrate and anhydrous.
SECTION 2. HAZARDS IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008Acute aquatic toxicity (Category 1)
Skin corrosion/irritation (Category 2)
Serious eye damage (Category 1)
Specific target organ toxicity, single exposure; Respiratory tract irritation (Category 3)
Hazardous to the aquatic environment, long-term hazard (Category 1)Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
Aquatic ToxicityGHS Label Elements
CorrosiveSignal Words: Danger
Hazard statements:
H302: Harmful if swallowed
H315: Causes skin irritation.
H318: Causes serious eye damage.
H335: May cause respiratory irritation.
H410: Very toxic to aquatic life with long lasting effects.Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P391: Collect spillage.
P501: Dispose of contents/ container to an approved waste disposal plant.Classification according to European Directive 67/548/EEC as amended:
Hazard symbol(s)
Xn Harmful
Xi Irritating
R-phrase(s)
R22 Harmful if swallowed.
R41 Risk of serious damage to eyes.
R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient: Zinc Sulfate Monohydrate
CAS Number: 7446-19-7
EINECS EC Number: 231-793-3
%: 98%-100%SECTION 4. FIRST AID MEASURES
Always seek medical attention after first aid measures are provided.
Eye Contact: Do not allow victim to rub eye (s). Let the eye (s) water naturally for a few minutes. If particle/dust does not dislodge, flush with lukewarm, gently flowing water for 5 minutes or until particle/dust is removed, while holding eyelid (s) open. If irritation persists, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye.
Skin Contact: Remove contaminated clothing, shoes and leather goods (e.g. watchbands, belts). Quickly and gently blot or brush away excess chemical. Wash gently and thoroughly with lukewarm gently flowing water and non-abrasive soap for 5 minutes. If irritation persists, repeat flushing. Obtain medical advice. Completely decontaminate clothing, shoes and leather goods before reuse or else discard.
Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air. Obtain medical advice.
Ingestion: Never give anything by mouth if victim is rapidly losing consciousness, or is unconscious or convulsing. Have victim rinse mouth thoroughly with water. DO NOT INDUCE VOMITING. Have victim drink 2 – 8 oz. (60 – 240 ml) of water. Zinc sulfate is an emetic and may cause vomiting. If vomiting occurs naturally, have victim rinse mouth with water again. Obtain medical advice and bring a copy of this MSDS.SECTION 5. FIRE FIGHTING MEASURES
Fire and Explosion Hazards: It does not burn or support combustion.
Extinguishing Media: Use any means of extinction appropriate for the surrounding fire conditions such as water spray, carbon dioxide, dry chemical, or foam.
Fire Fighting: Toxic fumes of sulfur dioxide may result from combustion. As with any fire, fire fighters should be fully trained and wear full protective clothing including an approved, self-contained breathing apparatus which supplies a positive air pressure within a full face piece mask. Do not use water directly on material. Do not allow water run-off to enter sewers or watercourses.SECTION 6. ACCIDENTAL RELEASE MEASURES
Procedures for Cleanup: Stop release if possible to do so safely. Contain spill, isolate hazard area, and deny entry. Sweep up or vacuum. Place contaminated material in suitable, labeled containers for final disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
Personal Precautions: Gloves and coveralls or other protective clothing are recommended for persons responding to an accidental release. Close-fitting safety goggles may be necessary in some circumstances to prevent eye contact.
Environmental Precautions: This product can pose a threat to the environment. Contamination of soil and water should be prevented. Keep spillage and runoff from storage areas from entering soil, streams or sewers.SECTION 7. HANDLING AND STORAGE
Store in cool, dry, well-ventilated area away from incompatible substances. Protect from physical damage. It is good practice to keep container closed when not in use. Avoid generating dust and the release of dust into the workplace. Good housekeeping is important to prevent accumulations of dust. Always practice good personal hygiene. Refrain from eating, drinking, or smoking in work areas.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Protective Clothing: The hazard potential is low. Where there is large scale use of this material and significant potential for worker contact, gloves and long sleeved work clothes or disposable coveralls may be necessary. Eye protection should be worn where dust is generated and there is a potential that eye contact may occur.
Ventilation: Use adequate local or general ventilation where necessary to maintain the concentrations of dust well below the recommended occupational exposure limits for general Particulates, Not Otherwise Specified (PNOS).
Respirators: Where dust or fumes are generated and cannot be controlled to within acceptable levels by engineering means, use appropriate NIOSH-approved respiratory protection equipment (a 42CFR84 Class N, R or P-95 particulate filter cartridge).SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: It is colorless, odorless granules or powder
Odor: None for Zinc Sulphate
Physical State: Solid
pH: 4 to 6 @ 10% solution
Freezing/Melting Point/Range: Loses water at 238°C; Decomposes at 680C (1256F)
Specific Gravity: 3.28 for heptahydrate
Solubility in Water: Soluble in water. Aqueous solutions are acidic.SECTION 10. STABILITY AND REACTIVITY
Stability and Reactivity: It is stable and not considered reactive under normal temperatures and pressures. Hazardous polymerization or runaway reactions will not occur.
Incompatibilities: None have been identified to date. Avoid excessive heating that may lead to decomposition of the material.
Hazardous Decomposition Products: High temperature operations such as oxy-acetylene cutting, electric arc welding or severe overheating will generate zinc oxide fume which, on inhalation in sufficient quantity, can produce metal fume fever. Under such conditions, sulfur dioxide will also be generated and can cause respiratory distress.SECTION 11. TOXICOLOGICAL INFORMATION
Acute Toxicity (Oral LD50): > 574 mg/kg Rat
Acute Toxicity (Dermal LD50): > 2000 mg/kg Rat
General: In the form in which it is sold it is relatively non-toxic. The major route of exposure would be through the generation and inhalation of airborne dust and especially the generation of zinc oxide fume through thermal decomposition.
Acute:
Skin/Eye: Direct contact may cause local irritation of the eyes or skin but would not cause tissue damage. Eye contact with solutions (>1%) may cause the appearance of white flecks on the lens of the eye. Dust or fume from burning or welding operations may also cause local irritation.
Inhalation: Acute inhalation may result in irritation but is not expected to cause significant harmful effects. Symptoms may include discomfort, coughing, tingling sensation, sneezing and/or shortness of breath and wheezing. Extreme heating of Zinc Sulphate monohydrate will generate zinc oxide fume. If inhaled, this fume can result in the condition called metal fume fever. The symptoms of metal fume fever will occur within 3 to 10 hours of exposure, and include immediate dryness and irritation of the throat, tightness of the chest, and coughing which may later be followed by flu-like symptoms of fever, malaise, perspiration, frontal headache, muscle cramps, low back pain, occasionally blurred vision, nausea, and vomiting. The symptoms are temporary and generally disappear, without medical intervention, within 24 to 48 hours of onset. There are no recognized complications, after affects, or chronic affects that result from this condition.
Ingestion: Zinc Sulfate ingestion of large doses can cause anemia and stomach symptoms. It is very astringent, and when ingested in excessive quantities, can irritate the stomach, resulting in abdominal pain, nausea, diarrhea and spontaneous vomiting.
Chronic: In general, zinc is considered to be a low toxicity metal. Zinc is a very important trace element for humans and the body regulates the amount of zinc stored by decreasing absorption and increasing excretion when intake is increased. Industrial experience has not identified any significant chronic effects from zinc sulfate to date. The item is not listed as a carcinogen by the Occupational Safety and Health Administration (OSHA), the National Toxicology Program (NTP), the International Agency for Research on Cancer (IARC), the American Conference of Governmental Industrial Hygienists (ACGIH) or the European Union (EU).
Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.SECTION 12. ECOLOGICAL INFORMATION
Eco toxicological data:
LC50 24 hours fish (rainbow trout) 1.24 mg/l
LC50 48 hours fish (rainbow trout) 2.4 - 5 mg/l
LC50 96 hours fish (rainbow trout) 0.24 - 0.83 mg/l
LC50 96 hours Daphnia 7.4 mg/l
Zinc Sulphate has high water solubility and its zinc and manganese contents are directly bio available. The zinc in particular may be toxic to aquatic organisms, especially fish, with water hardness, pH and dissolved organic carbon levels being regulating factors. In terrestrial systems, the mobility of zinc and manganese in soil and their degree of bioaccumulation in organisms is dependent on soil chemical conditions.SECTION 13. DISPOSAL CONSIDERATIONS
Do not wash the material down drain. Put uncontaminated material back into the process if at all possible.
Place contaminated material in suitable, labeled containers for disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
SECTION 14. TRANSPORT INFORMATION
DOT Classification: Not a DOT controlled material (United States).
ADR/RID:
UN Number: 3077
UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Zinc sulphate monohydrate)
Transport hazard class(es): 9
Packaging group: III
IATA:
UN Number: 3077
UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Zinc sulphate monohydrate)
Transport hazard class(es): 9
Packaging group: III
IMDG:
UN Number: 3077
UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Zinc sulphate monohydrate)
Transport hazard class(es): 9
Packaging group: IIISECTION 15. REGULATORY INFORMATION
USA Regulations:
TSCA 8(b) inventory: Zinc sulfate monohydrate
SARA 313 toxic chemical notification and release reporting: Zinc sulfate monohydrate
CERCLA: Hazardous substances: Zinc sulfate monohydrateCanada WHMIS: Not controlled under WHMIS (Canada)
CAS# 7446-20-0 is listed on Canada’s DSL List.
CAS# 7446-20-0 is not listed on the Canadian Ingredient Disclosure List.SECTION 16 - ADDITIONAL INFORMATION
Disclaimer:
***************************
Our company provides this Zinc Sulfate or Zinc Sulphate SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Zinc Sulfate or Zinc Sulphate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
***************************Zinc Sulphate manufacturers
Zinc Sulfate manufacturers at:MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.e-mail: info@mubychem.com
Global or International Zinc Sulphate or Zinc Sulfate Suppliers, Exporters, Importers, Manufacturers