|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Potassium Chloride Manufacturers, SDS MSDS Sheet
Potassium Chloride
Commercial Specifications & IP grade
Potassium Chloride BP USP ACS AR Analytical Reagent FCC Food
Grade Manufacturers
Potassium Chloride SDS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Potassium monochloridehloride, MOP, Muriate of Potash, Potassium Chloride
CAS No.: 7447-40-7
EINECS EC Number: 231-211-8
Molecular Weight: 74.55
Chemical Formula: KCl
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Hazards not otherwise classified (HNOC) or not covered by GHS:
May causes mild skin irritation.
May cause mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Ingredient: Potassium Chloride
CAS No.: 7447-40-7
EINECS EC Number: 231-211-8
Percent: 100%
4. First Aid Measures
Inhalation:If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Call a physician.
Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. Cold water may be used.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
5. Fire Fighting Measures
Fire: It is not considered to be a fire hazard.
Explosion: It is not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective.
Spills: Pick up and place in a suitable container for reclamation or disposal, using a method that does not generate dust.
7. Handling and Storage
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Hygroscopic.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Potassium Chloride is white crystals or powder.
Odor: It is odorless.
Solubility: Potassium Chloride is soluble 28.1 g/100g of water @ 0C.
Density: It has specific gravity of 1.987
pH: ca. 7 Saturated aq. sl. @ 15C
% Volatiles by volume @ 21C (70F): 0
Boiling Point: 1500C (2732F) Sublimes.
Melting Point: 772C (1422F)
10. Stability and Reactivity
Stability: Potassium Chloride is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Oxides of the contained metal and halogen, possibly also free, or ionic halogen.
Hazardous Polymerization: Will not occur.
Incompatibilities: Bromine trifluoride; potassium permanganate plus sulfuric acid.
11. Toxicological Information
Oral rat LD50: 2600 mg/kg
Irritation eye rabbit (standard Draize): 500 mg/24 hr mild; investigated as a mutagen.
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
12. Ecological Information
Toxicity to fish:
LC50 - Pimephales promelas (fathead minnow) - 880 mg/l - 96 h
Mortality NOEC - Pimephales promelas (fathead minnow) - 500 mg/l - 7 d
Mortality LOEC - Pimephales promelas (fathead minnow) - 1.000 mg/l - 7 d
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - > 440 mg/l - 48 h
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Potassium Chloride container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
DOT & ADR/RID: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated
15. Regulatory Information
USA:
Chemical Weapons Convention: No TSCA 12(b): No; CDTA: No
SARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: No, Reactivity: No (Pure / Solid)
Canada WHMIS: Not controlled under WHMIS (Canada).
Disclaimer:
***************************
Our company provides this
POTASSIUM CHLORIDE SDS information
sheet contained herein in good faith but makes no representation as to its
comprehensiveness or accuracy. This Potassium Chloride MSDS sheet is intended only as a
guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving the
information must exercise their independent judgment in determining its
appropriateness for a particular purpose.
***************************
Potassium Chloride Manufacturers:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD,
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: usa@mubychem.com
