Manufacturers Suppliers India

Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world..

The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Home--------Contact/E-mail

Shipping By Sea Bulk Jumbo Packing Palletized and Shrink Wrapped Drum Packing Air Freighting Liquid Pack Drum Pallets Export Import Supply

Zinc Chloride Anhydrous Manufacturers, SDS MSDS Sheet

ZnCl2 Powder MSDS
ZnCl2 Solution MSDS
Zinc Chloride Anhydrous & Solution Comercial Specifications
Zinc Chloride Anhydrous Solution BP USP IP ACS AR Analytical Reagent Grade Manufacturers

Zinc Chloride Anhydrous SDS MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Synonyms: Zinc Dichloride, Zinc Butter
CAS No.: 7646-85-7
EINECS EC Number: 231-592-0
Molecular Weight: 136.30
Chemical Formula: ZnCl2

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute Toxicity Oral Category 4
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 1
Hazardous to the aquatic environment, long-term hazard Category 2
Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Marine Pollution
Aquatic Toxicity

GHS Label Elements
Corosive
Corrosive

Signal Words: Danger
Hazard statements:
H302 Harmful if swallowed.
H315 - Causes skin irritation.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P310: Immediately call a POISON CENTER or doctor/ physician.
P314: Get Medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.
P391: Collect spillage.
P404: Store in a closed container.
P501 Dispose of contents/ container to an approved waste disposal plant.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
C  = Corrosive
N = Dangerous for the environment
R 34 Causes burns.
R 50/53 Very toxic to aquatic organisms; may cause long-term adverse effects in the aquatic environment.

3. Composition/Information on Ingredients

Ingredient: Zinc Chloride
CAS No.: 7646-85-7
EC Number: 231-592-0
Percent by Weight: 97 - 100%

4. First Aid Measures

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.
Ingestion: If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Fire: Not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: Use protective clothing and breathing equipment appropriate for the surrounding fire over.

6. Accidental Release Measures

Ventilate area of leak or spill. Keep unnecessary and unprotected people away from area of spill. Wear appropriate personal protective equipment. Spills: Pick up and place in a suitable container for reclamation or disposal, using a method that does not generate dust. Avoid release to the environment. US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities.

7. Handling and Storage

Keep in a well closed container stored under cold to warm conditions, 2 to 40 C, (36 to 104F). Protect it against physical damage. Containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
OSHA Permissible Exposure Limit (PEL):
1 mg/m3 (TWA) 8H, as fume.
ACGIH Threshold Limit Value (TLV):
1 mg/m3 (TWA); 2 mg/m3 (STEL) for fume
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): If the exposure limit is exceeded, a full face piece respirator with dust/mist filter may be worn up to 50 times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: White crystalline granules.
Odor: Odorless.
Solubility: Soluble 423 g/l00 g water @ 25C (77F)
Density: Specific gravity is 2.91
pH:  4 Aqueous solution
% Volatiles by volume @ 21C (70F): 0
Boiling Point: 732C (1350F)
Melting Point: 290C (554F)
Vapor Pressure (mm Hg): @ 428C (802F)

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: When heated to decomposition it emits toxic fumes of chlorine and zinc oxide.
Hazardous Polymerization: Will not occur.
Incompatibilities: Cyanides and sulfides, powdered zinc. When mixed with potassium, a weak explosion will occur on impact.
Conditions to Avoid: Incompatibles.

11. Toxicological Information

Oral rat LD50: 350 mg/kg.
Investigated as a tumorigen, mutagen, reproductive effector.
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

12. Ecological Information

Toxicity to fish: LC50 - Cyprinus carpio (Carp) - 0,4 - 2,2 mg/l - 96,0 h
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - 0,2 mg/l - 48 h
Toxicity to algae: Growth inhibition LOEC - Pseudokirchneriella subcapitata - 12,5 mg/l - 96 h
Environmental Toxicity: Dangerous to the environment. Very toxic to aquatic organisms; may cause long term adverse effects in the aquatic environment.
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

14. Transport Information

DOT USA & ADR/RID
Proper Shipping Name: ZINC CHLORIDE, ANHYDROUS
Hazard Class: 8
UN/NA: UN2331
Packing Group: III
Canada Transportation of Dangerous Goods:
Proper Shipping Name: ZINC CHLORIDE, ANHYDROUS
Hazard Class: 8
UN/NA: UN2331
Packing Group: III
International (Water, I.M.O.)
Proper Shipping Name: ZINC CHLORIDE, ANHYDROUS
Hazard Class: 8
UN/NA: UN2331
Packing Group: III
International (Air, I.C.A.O.)
Proper Shipping Name: ZINC CHLORIDE, ANHYDROUS
Hazard Class: 8
UN/NA: UN2331
Packing Group: III

15. Regulatory Information

USA:
SARA 302: Zinc chloride (7646-85-7) is Listed.
Section 313: Zinc chloride (7646-85-7) is Listed.
SARA 311/312: Acute: Yes; Chronic: Yes; Fire: No; Pressure: No; Reactivity: No (Pure / Solid)
CERCLA Hazardous Substances and corresponding RQs
: Listed, 1000 lb final RQ; 454 kg final RQ.
TSCA: CAS# 7646-85-7 is listed on the TSCA inventory.

Canada WHMIS: CLASS D-1B: Material causing immediate and serious toxic effects (TOXIC). CLASS D-2A: Material causing other toxic effects. (VERY TOXIC). CLASS E: Corrosive solid.
Zinc Chloride 7646-85-7 is listed on Canada's Ingredient Disclosure List.

Section 16 - Additional Information

Disclaimer:
***************************
Our company provides this ZINC CHLORIDE SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This ZINC CHLORIDE MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
***************************

Zinc Chloride manufacturers:

MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.

e-mail: info@mubychem.com

Old Spice: Manufacturing since more than Three Decades:-
Ammonium Chloride Sodium Acetate
Calcium Chloride Sodium Diacetate
Magnesium Chloride Sodium Thiosulfate
Potassium Chloride Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals-
Ammonium Chloride Zinc Chloride
Calcium Chloride Boric Acid
Calcium Phosphate Calcium Oxide
Gentian Violet Chromic Chloride
Manganese Sulfate Magnesium Sulfate
Potassium Acetate Maleic Acid
Sodium Phosphate Sodium Acetate
Sodium Propionate Sodium Thiosulfate
Benzyl Alcohol Borax; Sodium Borate
Calcium Hydroxide Calcium Sulfate
Calcium Saccharate Citric Acid
Magnesium Chloride Manganese Chloride
Methylene Blue Potassium Chloride
Potassium Phosphate Sodium Bicarbonate
Sodium Hydroxide  
Other Best Seller Products:
Ammonium Persulfate Sodium Chloride
Ammonium Phosphate Sodium Formate
Aluminum Chloride Sodium Monochloro Acetate
Barium Chloride Sodium Propionate
Calcium Nitrite Nitrate Sodium Phosphate
Ceric Ammonium Nitrate Butylated Hydroxyanisole
Calcium Propionate Butylated Hydroxytoluene
Cupric Chloride Tertiary Butylhydroquinone
Ferrous Sulfide Isatoic Anhydride
Magnesium Sulfate Zinc Sulphate
Potassium Iodide Zinc Ammonium Chloride Galvanizing Flux
Potassium Bromide Methyl & Dimethyl Anthranilate
Potassium Phosphate Ammonical Etchant
Potassium Nitrate Nitrite Potassium Phthalimide
Sodium Formaldehyde Bisulfite Oil Field Chemicals
Sodium Bromide Calcium-Magnesium Acetate
Sodium Butyrate Isatoic Anhydride & Derivatives
Sodium Nitrite Nitrate  

Zinc Chloride USP Grade Manufacturers

Global or International Zinc Chloride Anhydrous Solution Lye Brine BP IP USP FCC Suppliers, Exporters, Importers, Manufacturers