|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Benzyl Alcohol BP USP NF ACS Benzyl Alcohol Manufacturers
For MSDS Sheet Click MSDS of Benzyl Alcohol BP USP ACS Grade Manufacturers
Benzyl Alcohol BP
C7H8O ... 108.1 ... 100-51-6
Benzyl Alcohol
BP
DEFINITION
Phenylmethanol
Content
98.0 per cent to 100.5 per cent.
CHARACTERS
Appearance
Clear, colourless, oily liquid.
Solubility
Soluble in water, miscible with ethanol (96 per cent) and with fatty and
essential oils.
Relative density
1.043 to 1.049.
IDENTIFICATION
Infrared absorption spectrophotometry.
Comparison: benzyl alcohol CRS.
TESTS
Appearance of solution
Shake 2.0 ml with 60 ml of water. It dissolves completely. The
solution is clear and colourless.
Acidity
To 10 ml add 10 ml of ethanol (96 per cent) and 1 ml of phenolphthalein solution. Not more than 1 ml of
0.1 M sodium hydroxide
is required to change the colour of the indicator to pink.
Refractive index
1.538 to 1.541.
Peroxide
value
Maximum 5.
Related
substances
Gas chromatography to pass the tests
Benzyl Alcohol USP NF
C7H8O 108.14
Benzenemethanol.
Benzyl alcohol
USP [100-51-6].
Benzyl Alcohol contains not less than 98.0 percent and not more than 100.5 percent of C7H8O.
Labeling— Where Benzyl Alcohol is intended for use in the manufacture of injectable dosage forms, it is so labeled.
Clarity
of solution—
Test solution— Dissolve 2.0 g of Benzyl Alcohol in 60 mL of water, and mix.
To pass the test as per monograph
The Test solution shows the same clarity as that of water, or its
opalescence is not more pronounced than that of Reference suspension.
Color of
solution—
Test solution— Use the Test solution prepared in the test for
Clarity of solution.
To pass the test as per monograph
Test solution
has the color of water.
Identification— Infrared Absorption
197F , on un-dried specimen.
Peroxide
value: not more than 5.
Refractive index: between 1.538 and 1.541 at 20.
Acidity— Neutralize 50 mL of alcohol containing 1 mL of phenolphthalein TS with 0.10
N sodium hydroxide. Dissolve 10 mL of Benzyl Alcohol in 10 mL of the neutralized
alcohol, and titrate with 0.10 N sodium hydroxide to the first appearance of a
pink color that persists for not less than 30 seconds: not more than 1.0 mL is
consumed.
Limit of
nonvolatile residue— [NOTE—Ensure that the Benzyl Alcohol to be examined
complies with the test for Peroxide value before performing this test.]
Evaporate 10.0 g of Benzyl Alcohol on a water bath to dryness, and dry the
residue at 105 for 1 hour. Cool in a desiccator, and weigh. The residue weighs
not more than 5 mg: not more than 0.05% of nonvolatile residue is found.
Related compounds—
Test solution— Use the Benzyl Alcohol specimen under examination.
To pass the test as per monograph
Benzyl Alcohol ACS
Benzenemethanol
C6H5CH2OH
Formula Wt 108.14
CAS Number 100-51-6
REQUIREMENTS
Assay
99.0% C6H5CH2OH
MAXIMUM ALLOWABLE
Color (APHA) .................................. 20
Residue after ignition ......................... 0.005%
Acetophenone (C6H5COCH3) ........ 0.02%
Benzaldehyde (C6H5CHO) .............. 0.01%
Benzyl Alcohol is also called Phenylmethanol
Benzyl Alcohol BP USP NF ACS Manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
