|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Magnesium Chloride BP USP Manufacturers
Magnesium Chloride Pure Hexahydrate Anhydrous Manufacturers
MSDS
of Magnesium Chloride Anhydrous Manufacturers
MSDS of
Magnesium Chloride Hexahydrate BP IP USP FCC AR Analytical Reagent ACS Food grade Manufacturers
We manufacture magnesium chloride in all grades like technical, pure, food grade, IP BP USP AR ACS Grade etc.
Magnesium Chloride USP
MgCl2.6H2O
203.30
Magnesium Chloride USP
Magnesium Chloride
Hexahydrate USP[7791-18-6].
Magnesium Chloride Anhydrous USP95.21 [7786-30-3].
Magnesium Chloride contains not less
than 98.0 percent and not more than 101.0 percent of
MgCl2·6H2O.
Packaging and storage— Preserve in tight containers.
Labeling— Where the product is intended for use
in hem dialysis, it is so labeled.
Identification— A solution (1 in 20) responds to the tests for Magnesium and for
Chloride
pH: between 4.5 and 7.0, in a 1 in 20 solution in
carbon dioxide-free water.
Insoluble matter— not more than 0.005% is found.
Sulfate — A 10-g portion shows no more
sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Barium— Dissolve 1 g in 10 mL of water, and add 1 mL
of 2 N sulfuric acid: no turbidity is produced within 2 hours.
Limit of calcium— the limit is 0.01%.
Potassium— Dissolve 5 g in 5 mL of water, and add 0.2 mL
of sodium bitartrate TS: no turbidity is produced within 5 minutes.
Aluminum
(where it is labeled as intended for use in
hem dialysis)— the limit is 1 µg per g.
Heavy metals —
the limit is 0.001%.
Organic volatile impurities: meets the requirements.
Magnesium Chloride BP
MgCl2.6H2O
Magnesium Chloride BP
Magnesium Chloride
Hexahydrate BP[7791-18-6].
Magnesium Chloride Anhydrous BP95.21 [7786-30-3].
DEFINITION
Content
98.0 per cent to 101.0 per cent of MgCl2,6H2O.
CHARACTERS
Appearance
Colourless crystals, hygroscopic.
Solubility
Very soluble in water, freely soluble in ethanol (96 per cent).
IDENTIFICATION
Water % (see Tests).
It gives reaction of chlorides.
It gives the reaction of magnesium.
TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water R
prepared from distilled water and dilute to 100.0 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 5 ml of solution S add 0.05 ml of
phenol red solution R. Not more
than 0.3 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide
is required to change the colour of the indicator.
Bromides
Maximum 500 ppm.
Sulphates
Maximum 100 ppm, determined on solution S.
Aluminium
Maximum 1 ppm, if intended for use in the manufacture of peritoneal dialysis
solutions, hem dialysis solutions, or haemofiltration solutions.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium
Maximum 0.1 per cent.
Iron
Maximum 10 ppm, determined on solution S.
Potassium
Maximum 5.0 × 102 ppm, if intended for use in the manufacture of
parenteral dosage forms.
Atomic emission spectrometry: Passes the test
Heavy metals
Maximum 10 ppm.
Water
51.0 per cent to 55.0 per cent, determined on 50.0 mg.
Magnesium Chloride FCC US Food Chemical Codex
MgCl2·6H2O Formula wt 203.30
DESCRIPTION
Magnesium Chloride occurs
as colorless flakes or crystals. It contains six molecules of water of
hydration. It is hygroscopic, very soluble in water, and freely soluble in
alcohol.
Function: Color-retention agent; firming agent.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives
positive tests for Magnesium and for Chloride.
Assay: Not less than 99.0% and not more than 105.0% of
MgCl2·6H2O.
Ammonium: Not more
than 0.005%.
Lead: Not more than
4 mg/kg.
Sulfate: Not more
than 0.03%.
Magnesium Chloride Hexahydrate ACS Specifications
Magnesium
Chloride ACS American Chemical Society Reagent Grade
MgCl2 . 6H2O
Formula Wt 203.30
CAS Number 7791-18-6
REQUIREMENTS
Assay:
--------------
99.0-102.0% MgCl2 . 6H2O
MAXIMUM ALLOWABLE
Insoluble
matter: --- 0.005%
Nitrate (NO3):
------
0.001%
Phosphate (PO4):
---- 5
ppm
Sulfate (SO4):
------
0.002%
Ammonium (NH4): ----- 0.002%
Barium (Ba):
-------- 0.005%
Calcium (Ca):
------- 0.01%
Manganese (Mn):
----- 5 ppm
Potassium (K):
------ 0.005%
Sodium (Na):
-------- 0.005%
Strontium (Sr):
----- 0.005%
Heavy metals (as Pb):
5 ppm
Iron (Fe):
---------- 5 ppm
Magnesium Chloride BP USP FCC Food grade ACS Analytical Reagent Manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
