|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Sodium Chloroacetate Mono Chloro Acetate Sodium Monochloroacetate Manufacturers
For MSDS Sheet Click MSDS of Sodium Mono Chloro Acetate Chloroacetate, Sodium Monochloroacetate Manufacturers
Sodium Monochloroacetate Sodium Chloroacetate
CAS: 3926-62-3
ITC-HSN Code: 2915
40 10
Formula:
Na-CH2COO-Cl
Specifications:
Appearance: Fine
White Powder
Assay: 98% min
Sodium
Dichloroaceate: 0.3% max
Sodium Chloride:
0.5% max
Moisture Content: 1%
max
Heavy Metals: 0.001%
max
Iron: 0.001% max
SODIUM MONO CHLORO ACETATE Sodium m Monochloroacetate (SMCA) is the derivative of Monochloroacetic Acid (MCA) obtained by its neutralization with alkali. Sodium Monochloro Acetate is a versatile product and is used as raw material or intimidates in the manufacture of the following important organic & textile chemicals:
Herbicides such as 2.4D, 2,4,5 Trichlorophenoxyacetic
Acid etc.
Sequestering agents such as Sodium salt of Ethylene
Diaminetetria acetic Acid (EDTA), Nitriloacetic Acid
etc.
Sodium
Carboxymethyl Cellulose (CMC).
Carboxymethyl Starch.
Glycolic
Acid
Trioglycolic Acid
Cyanoacetic Acid and it its Easters
Dyes
Such as Indigo
Substituted Guar Gums.
Sodium Monochloroacetate is a white colored free flowing fine powder with a pungent odor. It is readily soluble in water and available as a technically pure grade.
Sodium Monochloroacetate is available as granule and in powder form (of the two forms, granules have better flowing characteristics and reduced caking behavior, making them easier to use).At room temperature Sodium Monochloro Acetate is a white hygroscopic solid (in powder or granule form). Hydrolysis of aqueous solutions of SMCA very rapidly leads to the formation of sodium glycolate and hydrochloric acid, depending on the temperature and time for which it is kept in open.
Sodium Monochloro Acetate is a hazardous substance and has been
officially classified as “toxic" but unlike MCA, SMCA is not
corrosive to the skin. As far as known, Sodium Monochloro Acetate does not penetrate the
skin but is absorbed after ingestion, causing systemic poisoning.
Prolonged contact should be avoided since SMCA is hygroscopic and
hydrolysis may occur on wet skin and eyes.
Sodium Monochloro Acetate is hazardous when ingested or inhaled.
Even low concentrations may cause poisoning, associated with
vomiting and/or symptoms of shock (agitation and/or confusion, later
unconsciousness, pale clammy skin, rapid pulse). This may lead to
very serious and even fatal injury if immediate and adequate action
is not taken.
Exposure should be as low as possible but at least lower than the limits set by local regulations such as the Maximum Allowable Concentration (MAC) value for a working day of 8 hours. Expert medical attention should be obtained immediately for anyone who has been in contact with ingested or inhaled Sodium Monochloro Acetate.
Personal protection, such as acid resistant gloves and clothing, safety goggles, and dust protection for handling solids, must be used to avoid contact with Sodium Mono chloroacetate.
Sodium Monochloroacetate manufacturers
Sodium Mono Chloro Acetate or Chloroacetate manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
