|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Potassium Acetate USP BP IP ACS AR Analytical Reagent Manufacturers
For MSDS Sheet Click MSDS of Potassium Acetate BP USP IP ACS Analytical Reagent grade Manufacturers
Potassium Acetate BP
C2H3O2K -- 98.14 -- 127-08-2
DEFINITION
Potassium acetate contains not less than 99.0 per cent and not more than
the equivalent of 101.0 per cent of C2H3KO2,
calculated with reference to the dried substance.
CHARACTERS
A white, crystalline powder or colourless crystals,
deliquescent, very soluble in water, freely soluble in alcohol.
IDENTIFICATION
A. It gives reaction of
acetates.
B. It gives reaction of potassium.
TESTS
Solution S
Dissolve 10.0 g in distilled water and
dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
pH
Dissolve 1.0 g in carbon dioxide-free water and dilute to 20 ml
with the same solvent. The pH of the solution is 7.5 to 9.0.
Reducing substances
Dilute 10 ml of solution S to 100 ml with water. Add 5 ml of
dilute sulphuric acid and 0.5 ml of a 0.32 g/l solution of potassium
permanganate. Mix and boil gently for 5 min. The solution remains pink.
Chlorides
Dilute 2.5 ml of solution S to 15 ml with water. The solution
complies with the limit test for chlorides (200 ppm).
Sulphates
Dilute 7.5 ml of solution S to 15 ml with distilled water. The
solution complies with the limit test for sulphates (200 ppm).
Aluminium
If intended for use in the manufacture of peritoneal dialysis solutions,
haemofiltration solutions or hem dialysis solutions, it complies with the
test for aluminium. Dissolve 2.0 g in 50 ml of water and add 5 ml of
acetate buffer solution pH 6.0. The solution complies with the limit
test for aluminium (1 ppm). Use as a reference solution a mixture of 1 ml
of aluminium standard solution (2 ppm Al), 5 ml of acetate buffer
solution pH 6.0 R and 49 ml of water. To prepare the blank use a
mixture of 5 ml of acetate buffer solution pH 6.0 R and 50 ml of water.
Iron
Dilute 5 ml of solution S to 10 ml with water. The solution
complies with the limit test for iron (20 ppm).
Heavy metals
Dissolve 5.0 g in
water and dilute to 20 ml with the same
solvent. 12 ml of the solution complies with limit test A for heavy metals
(4 ppm). Prepare the standard using lead standard solution (1 ppm Pb).
Sodium
Not more than 0.5 per cent of Na, determined by atomic emission
Loss on drying
Not more than 3.0 per cent, determined on 1.000 g by drying in an oven
at 100 °C to 105C.
Potassium Acetate USP
Potassium Acetate
C2H3KO2 98.14
Acetic acid, potassium salt.
Potassium acetate [127-08-2].
Potassium Acetate contains not less than 99.0 percent and not more than
100.5 percent of C2H3KO2, calculated on the dried basis.
Identification— A
solution (1 in 10) responds to the tests for Potassium and for Acetate.
pH: between 7.5 and
8.5, in a solution (1 in 20).
Loss on drying— Dry it at 150 for 2 hours: it loses not more than
1.0% of its weight.
Heavy metals—
the limit is 0.002%.
Limit of sodium— To pass the test not more than 0.03% of sodium is
found.
ACS Specifications
American Chemical Society
Potassium Acetate ACS
CH3COOK
Formula Wt. 98.14
CAS Number 127-08-2
REQUIREMENTS
Assay
99.0% CH3COOK
pH of a 5% solution
6.5-9.0 at 25C
MAXIMUM ALLOWABLE
Insoluble matter ........... 0.005%
Chloride (Cl)
............... 0.003%
Phosphate (PO4) ........ 0.001%
Sulfate (SO4)
............. 0.002%
Heavy metals (as Pb) .. 5 ppm
Iron (Fe)
..................... 5 ppm
Calcium (Ca) .............. 0.005%
Magnesium (Mg)
........ 0.002%
Sodium (Na) .............. 0.03%
Potassium Acetate BP USP ACS AR Analytical Reagent Manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
