|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Sodium Thiosulphate Thiosulfate Anhydrous Pentahydrate BP IP USP ACS Analytical Reagent FCC Food grade Manufacturers
Sodium Thiosulphate
Manufacturers Technical IP & Pure
MSDS of Sodium Thiosulphate Thiosulfate Anhydrous Manufacturers
MSDS of Sodium Thiosulfate Thiosulphate Pentahydrate USP ACS Analytical
Reagent FCC Food grade Manufacturers
Sodium Thiosulfate USP
Na2S2O3·5H2O 248.19
Sodium
Thiosulfate USP
Contains
not less than 99.0 percent and not more than 100.5 percent of Na2S2O3,
calculated on the anhydrous basis.
Packaging and storage— Preserve in tight containers.
Identification—
A: To a solution (1 in
10) add a few drops of iodine TS: the color is discharged.
B: A solution (1 in 10)
responds to the tests for Sodium and for Thiosulfate.
Water— Dry about 1.0 g,
accurately weighed, in vacuum at 40 o to 45o for 16 hours:
it loses between 32.0% and 37.0%
of its weight.
Calcium— Dissolve 1 g Sodium Thiosulfate in 20 mL of water, and add a few mL of ammonium oxalate TS: no turbidity is produced.
Heavy metals—: the
limit is 0.002%.
Sodium Thiosulphate BP
Na2S2O3,5H2O
Sodium
Thiosulphate BP
DEFINITION
Content
99.0 per cent to 101.0 per cent of Na2S2O3,5H2O.
CHARACTERS
Appearance
Transparent, colourless crystals, efflorescent in dry air.
Solubility
Very soluble in water, practically insoluble in ethanol 96 per cent. It
dissolves in its water of crystallization at about 49 °C.
IDENTIFICATION
A.
It decolorizes iodinated potassium iodide solution.
B.
To 0.5 ml of solution S (see Tests) add 0.5 ml of water R and 2 ml of silver nitrate solution. A white precipitate is formed which rapidly becomes
yellowish and then black.
C.
To 2.5 ml of solution S add 2.5 ml of water and 1 ml of hydrochloric
acid. A precipitate of sulphur is formed and gas is evolved which gives a blue colour to starch iodate paper.
D.
1 ml of solution S gives reaction of sodium.
TESTS
Solution S
Dissolve 10.0 g in
carbon
dioxide-free water R prepared from distilled water R and dilute to
100 ml with the same solvent.
Appearance of solution
The freshly prepared solution
is clear and colourless.
Dissolve 10.0 g in 50 ml of
distilled water, add 1 ml of 0.1 M sodium hydroxide and dilute to 100
ml with the same solvent.
pH
6.0 to 8.4 for the freshly
prepared solution S.
Sulphates and sulphites
Maximum 0.2 per cent.
Sulphides
To 10 ml of solution S add
0.05 ml of a freshly prepared 50 g/l solution of sodium nitroprusside. The
solution does not become violet.
Heavy metals
Maximum 10 ppm.
ASSAY
Dissolve Sodium Thiosulfate 0.500 g in 20 ml of
water and titrate with 0.05 M iodine, using 1 ml of starch solution,
added towards
the end of the titration, as indicator.
1 ml of 0.05 M iodine
is equivalent to 24.82 mg of Na2S2O3,5H2O.
Sodium Thiosulfate FCC; US Food Chemical Codex
Sodium
Thiosulfate
Sodium
Hyposulfite
Na2S2O3·5H2O Formula wt 248.19
DESCRIPTION
Sodium
Thiosulfate or Sodium Thiosulphate occurs as
large, colorless crystals or as a coarse, crystalline powder. It is deliquescent
in moist air and effloresces in dry air at a temperature above 33°. Its
solutions are neutral or faintly alkaline to litmus. One gram dissolves in 0.5 mL of water. It is insoluble in alcohol.
Function: Sequestrant;
antioxidant.
REQUIREMENTS
Identification
A. Add a few drops of iodine
TS to a 1:10 aqueous solution. The color disappears.
B. A 1:20 aqueous solution
gives positive tests for Sodium and for Thiosulfate.
Assay: Not less than
99.0% and not more than 100.5% of Na2S2O3 after drying.
Lead: Not more than 2
mg/kg.
Selenium: Not more than
0.003%.
Water: Between 32.0% and
37.0%.
Sodium Thiosulfate Pentahydrate ACS; Sodium Thiosulfate ACS
American Chemical Society Reagent Grade
Na2S2O3 . 5H2O
Formula Wt 248.19
CAS Number 10102-17-7
REQUIREMENTS
Assay: 99.5-101.0% Na2S2O3-5H2O
pH of a 5% solution: 6.0-8.4 at
25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Nitrogen compounds (as N): 0.002%
Sulfate and sulfite (as SO4): 0.1%
Sulfide (S): Passes test
Sodium Thiosulphate BP Sodium Thiosulfate USP ACS Analytical Reagent FCC Food grade manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favour that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again.
