|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Sodium Bicarbonate BP USP ACS Analytical Reagent FCC Food grade Manufacturers
MSDS of Sodium
Bicarbonate
Sodium Bicarbonate Manufacturers BP USP IP ACS Analytical
Reagent FCC Food Grade Manufacturers
Sodium Bicarbonate BP
Sodium Hydrogen Carbonate
Sodium Bicarbonate BP
NaHCO3
84.0ıı144-55-8
Action and use
Antacid; used in treatment of electrolyte deficiency.
DEFINITION
Content
99.0 per cent to 101.0 per cent.NaHCO3
CHARACTERS
Appearance
White or almost white, crystalline powder.
Solubility
Soluble in water, practically insoluble in ethanol (96
per cent). When heated in the dry state or in solution, it gradually changes
into sodium carbonate.
IDENTIFICATION
A. To 5 ml of solution S add 0.1 ml of phenolphthalein solution. A pale pink colour is produced. Heat; gas is
evolved and the solution becomes red.
B. It gives the reaction of carbonates and
bicarbonates.
C. Solution S gives reaction of sodium.
TESTS
Solution S
Dissolve
5.0 g in 90 ml of carbon dioxide-free water and dilute to 100.0 ml with
the same solvent.
Appearance of solution
Solution S
is clear and colourless.
Carbonates
The pH of freshly prepared
solution S is not greater than 8.6
Chlorides
Maximum 150 ppm
Sulphate
Maximum 150 ppm
Ammonium
Maximum 20
ppm.
Arsenic
Maximum 2
ppm, determined on 0.5 g.
Calcium
Maximum 100
ppm.
To a
suspension of 1.0 g in 10 ml of distilled water add hydrochloric acid
until neutral and dilute to 15 ml with distilled water.
Iron
Maximum 20 ppm.
Heavy
metals
Maximum 10 ppm.
Sodium Bicarbonate USP NaHCO3
NaHCO3
Sodium Bicarbonate USP
84.01
Carbonic acid monosodium salt
Monosodium carbonate
Sodium Bicarbonate contains not less than 99.0 percent and not more than 100.5 percent of NaHCO3, calculated on the dried basis.
Labeling Where Sodium Bicarbonate is intended for use in
hem dialysis, it is so labeled.
Identification A solution of it meets the requirements of the
tests for Sodium 191 and for Bicarbonate.
Loss on drying Dry about 4 g, accurately weighed, over silica
gel for 4 hours: it loses not more than 0.25% of its weight.
Insoluble substances Dissolve 1 g in 20 mL of water: the resulting
solution is complete and clear.
Carbonate (where it is
labeled as intended for use in hem dialysis) The limit of carbonate is not more than 0.23%. to be determined
as per tests defined.
Normal carbonate Add 2.0 mL of 0.10 N hydrochloric acid and 2
drops of phenolphthalein TS to 1.0 g of Sodium Bicarbonate, previously dissolved
without agitation in 20 mL of water at a temperature not exceeding 15 : the
solution does not assume more than a faint pink color immediately.
Chloride:
a 0.35-g portion shows no more chloride than corresponds to 1.48 mL of 0.0010 N
hydrochloric acid (0.015%).
Limit of sulfur compounds To pass the test
Aluminum (where it is labeled as intended for use in
hem dialysis) The limit is 2 ΅g per g.
Arsenic
The limit is 2 ΅g per g.
Calcium and magnesium (where it is labeled as intended for use in
hem dialysis)
the percentage of Ca in the specimen limit is
0.01%.
the percentage of Mg in the specimen the limit
is 0.004%.
Copper (where it is labeled as intended for use in
hem dialysis) Cu in the specimen
the limit is 1 ΅g per g.
Iron (where it is labeled as intended for use in
hem dialysis) not more than 5΅g per
g.
Heavy metalsthe limit is 5
΅g per g.
Limit of ammonia to pass the test
Limit of organics (where it is labeled as intended for use in
hem dialysis) To pass the test
Sodium Bicarbonate FCC
Sodium Hydrogen
Carbonate; Baking Soda.
Sodium Bicarbonate
FCC
NaHCO3
Formula wt 84.01
INS:
500(ii) CAS: [144-55-8]
DESCRIPTION
Sodium
Bicarbonate occurs as a white, crystalline powder. It is stable in dry air, but
it slowly decomposes in moist air. One gram dissolves in 10 mL of water. It is
insoluble in alcohol. Its solutions, when freshly prepared with cold water
without shaking, are alkaline to litmus. The alkalinity increases as the
solutions stand, are agitated, or are heated.
Function: pH control agent; leavening agent.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for
Sodium
and for Bicarbonate.
Assay: Not less than 99.0% and not more than 100.5% of NaHCO3 after drying.
Ammonia: Passes test.
Insoluble: Substances Passes test.
Lead: Not more than 2 mg/kg.
Loss on
Drying: Not more than 0.25%.
Sodium Bicarbonate ACS
Sodium BicarbonateSodium Hydrogen Carbonate ACS
NaHCO3
Formula Wt 84.01
CAS Number 144-55-8
REQUIREMENTS
Assay (dried basis): 99.7-100.3% NaHCO3
MAXIMUM ALLOWABLE
Insoluble matter: 0.015%
Chloride (Cl): 0.003%
Phosphate (PO4): 0.001%
Sulfur compounds (as SO4): 0.003%
Ammonium (NH4): 5 ppm
Heavy metals (as Pb): 5 ppm
Iron (Fe): 0.001%
Calcium (Ca): 0.02%
Magnesium (Mg): 0.005%
Potassium (K): 0.005%
Sodium bicarbonate BP Sodium bicarbonate USP IP ACS Analytical Reagent FCC Food grade manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
