 |
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Borax BP Ph Eur JP Sodium Borate USP NF ACS IP, Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
| The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals | |
--------
Borax BP Ph Eur JP Sodium Borate USP NF ACS IP Manufacturers
USP-NF BP ACS IP
For MSDS Sheet Click MSDS of Borax Sodium Borate BP USP NF IP ACS FCC Grade Manufacturers
Borax BP
Borax BP; Sodium Borate; Sodium Tetraborate
Na2B4O7,10H2O -- 381.4 -- 1303-96-4
Borax contains not less than 99.0 per cent and not more than the equivalent of 103.0 per cent of disodium tetraborate decahydrate.
CHARACTERS
A white, crystalline powder, colourless crystals or crystalline masses,
efflorescent, soluble in water, very soluble in boiling water, freely soluble in glycerol.
IDENTIFICATION
A. To 1 ml of solution S (see Tests) add 0.1 ml of sulphuric acid and 5 ml of methanol \ and ignite. The flame has a green border.
B. To 5 ml of solution S add 0.1 ml of phenolphthalein solution. The solution is red. On the addition of 5 ml of glycerol (85 per cent) the colour disappears.
C. Solution S gives the reactions of sodium.
TESTS
Solution S
Dissolve 4.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
pH
The pH of solution S is 9.0 to 9.6.
Sulphates
15 ml of solution S complies with the limit test for sulphates (50 ppm).
Ammonium
6 ml of solution S diluted to 14 ml with water complies with the limit test for ammonium (10 ppm).
Arsenic
5 ml of solution S complies with limit test A for arsenic (5 ppm).
Calcium
15 ml of solution S complies with the limit test for calcium (100 ppm).
Heavy metals
12 ml of solution S complies with limit test A for heavy metals (25 ppm).
Sodium Borate USP NF
Sodium Borate USP-NF; Borax USP NF
Na2B4O7·10H2O 381.37
Borax
Borax [1303-96-4]
Anhydrous 201.22 [1330-43-4]
Sodium Borate contains an amount of Na2B4O7 equivalent to not less than 99.0 percent and not more than 105.0 percent of Na2B4O7·10H2O.
Identification—
A solution (1 in 20) responds to the tests for Sodium and for Borate.
Carbonate and bicarbonate— To 5 mL of a solution (1 in 20), contained in a test tube, add 1 mL of 3 N hydrochloric acid: no effervescence is observed.
Heavy metals— the limit is 0.002%.
Sodium Borate Decahydrate or Borax ACS
Sodium Tetraborate Decahydrate ACS
Na2B4O7 . 10H2O
Formula Wt 381.37
CAS Number 1303-96-4
REQUIREMENTS
Assay: 99.5-105.0% Na2B4O7 .
10H2O
pH of a 0.01 M solution: 9.15-9.20 at 25C
MAXIMUM ALLOWABLE
Insoluble matter ........... 0.005%
Chloride (Cl) ............... 0.001%
Phosphate (PO4) ......... 0.001%
Sulfate (SO4) .............. 0.005%
Calcium (Ca) ............... 0.005%
Heavy metals (as Pb) ... 0.001%
Iron (Fe) ..................... 5 ppm
Borax BP Sodium Borate USP NF ACS Manufacturers or Sodium Tetraborate or Sodium Borate Manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
