|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Iron Sulphide Ferrous Sulfide Manufacturers, SDS MSDS Sheet
Iron Sulphide Ferrous Sulfide Sulphide Manufacturers
Iron Sulphide SDS GHS, MSDS Sheet Ferrous Sulfide Material Safety Data Sheet
Section 1 - Chemical Product and Identification
MSDS Name: Iron Sulphide
Synonyms: Ferrous sulfide
Section 2 - Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3 - Composition, Information on Ingredients
Chemical Name: Iron Sulphide or Ferrous Sulfide
CAS#: 1317-37-9
EINECS/ELINCS: 215-268-6
Percent: 100
Section 4 - First Aid Measures
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: Treat symptomatically and supportively.
Antidote: None reported.
Section 5 - Fire Fighting Measures
General Information: For Ferrous sulfide, as in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: For small fires over Iron Sulphide, use water spray, dry chemical, carbon dioxide or chemical foam.
Flash Point: Not applicable.
Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions.
Section 7 - Handling and Storage
Handling: Use Ferrous sulfide with adequate ventilation. Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Storage: Store Iron Sulphide in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - Exposure Controls, Personal Protection
Engineering Controls: For Iron Sulphide or Ferrous sulfide use adequate ventilation to keep airborne concentrations low.
Exposure Limits
WEL: Short-term value: 2 mg/m³; Long-term value: 1 mg/m³ as Fe
ACGIH: 1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble)
NIOSH: 1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble)
OSHA - Final PELs: None listed
OSHA Vacated PELs: Iron (II) Sulfide: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - Physical and Chemical Properties
Physical State: Solid
Appearance: Iron Sulphide or Ferrous sulfide is gray to brown black
Odor: None reported
Boiling Point: Decomposes.
Freezing/Melting Point: 1194 deg C
Solubility: It is insoluble in water.
Specific Gravity/Density: 2 gm/cm³
Molecular Formula: FeS
Molecular Weight: 87.907
Section 10 - Stability and Reactivity
Chemical Stability: Iron Sulphide or Ferrous sulfide is stable under normal temperatures and pressures.
Conditions to Avoid: Moisture, exposure to air, strong oxidants.
Incompatibilities with Other Materials: Strong acids.
Hazardous Decomposition Products: Oxides of sulfur, hydrogen sulfide.
Hazardous Polymerization: Has not been reported.
Section 11 - Toxicological Information
RTECS#: CAS# 1317-37-9 unlisted.
LD50 Oral - Rat - female: > 2.000 mg/kg
LD50 Dermal - Rat - male and female: > 2.000 mg/kg
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Teratogenic: No data available.
Mutagenic: No data available.
Section 12 - Ecological Information
LC50-Gambusia affinis (Mosquito fish): > 10.000 mg/l – 96.0 h
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Section 13 - Disposal Considerations
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.
Section 14 - Transport Information
DOT & ADR/RID: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated
Section 15 - Regulatory Information
USA:
TSCA: CAS# 1317-37-9 is listed on the TSCA inventory.
SARA Section 302 Extremely Hazardous Substances: None of the chemicals in this product have a TPQ.
Section 313: No chemicals are reportable under Section 313.
MASSACHUSETTS RIGHT TO KNOW COMPONENETS: No components are subject to the Massachusetts Right to Know Act.
PENNSYLVANIA RIGHT TO KNOW COMPONENTS: Iron sulphide
NEW JERSEY RIGHT TO KNOW COMPONENTS: Iron sulphide
CALIFORNIA PROP. 65 COMPONENTS: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Health & Safety Reporting List: None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules: None of the chemicals in this product are under a Chemical Test Rule.
Section 12b: None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs: None of the chemicals in this material have an RQ.
Canadian WHMIS Classifications: -
Disclaimer:
****************************
Our company provides this information contained herein in good faith but makes
no representation as to its comprehensiveness or accuracy. This Iron Sulfide or Ferrous Sulphide
Sulfide SDS
sheet is intended only as
a guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving the
information must exercise their independent judgment in determining its
appropriateness for a particular purpose.
****************************
Iron Sulphide manufacturers Ferrous Sulfide Sulphide manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
