|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Sodium Chloride Manufacturers, SDS MSDS
Sodium Chloride BP USP ACS FCC IP Manufacturers
Sodium Chloride SDS MSDS Sheet, Material Safety Data Sheet
Section 1 - Chemical Product and Identification
MSDS Name: Sodium Chloride
Synonyms: Common salt; Halite; Rock salt; Saline; Salt; Sea salt; Table salt.
Chemical Formula: NaCl
Molecular Weight: 58.44
CAS Number: 7647-14-5
EINECS EC Code: 231-598-3
Section 2 - Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according GHS & Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3 - Composition, Information on Ingredients
Chemical Name: Sodium chloride
CAS#: 7647-14-5
EINECS EC No.: 231-598-3
Percent:: 100
Section 4 - First Aid Measures
Always seek medical advice after the first aid treatment.
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid. Wash mouth out with water.
Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: None
Section 5 - Fire Fighting Measures
General Information: Water runoff can cause environmental damage. Dike and collect water used to fight fire. Wear appropriate protective clothing to prevent contact with skin and eyes. Wear a self-contained breathing apparatus (SCBA) to prevent contact with thermal decomposition products. Substance is noncombustible.
Extinguishing Media: For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.
Special hazards arising from the substance: Hydrogen chloride gas, Sodium oxides
Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation.
Section 7 - Handling and Storage
Handling: Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Do not ingest or inhale.
Storage: Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.
Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Good general ventilation should be sufficient to control airborne levels. Facilities storing or utilizing the material should be equipped with an eyewash facility and a safety shower.
Exposure Limits: Sodium Chloride is not listed by ACGIH NIOSH & OSHA-Final PELs.
Personal Protective Equipment
Eyes: Wear safety glasses with side shields.
Skin: Wear appropriate gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators: A NIOSH/MSHA approved air purifying dust or mist respirator or European Standard EN 149.
Section 9 - Physical and Chemical Properties
Physical State: Solid
Appearance: Colorless or white
Odor: Odorless
Viscosity: Not available.
Boiling Point: 2575 deg F
Freezing/Melting Point:1474 deg F
Solubility: Soluble in water.
Specific Gravity/Density: 2.165
Molecular Formula: NaCl
Molecular Weight: 58.44
Section 10 - Stability and Reactivity
Chemical Stability: Stable.
Conditions to Avoid: High temperatures, exposure to moist air or water.
Incompatibilities with Other Materials: It reacts with most non-noble metals such as iron or steel, building materials (such as cement), bromine, or trifluoride. Potentially explosive reaction with dichloro-maleic anhydride + urea. Electrolysis of mixtures with nitrogen compounds may form explosive nitrogen tri-chloride.
Hazardous Decomposition Products: Toxic fumes of chlorine or hydrogen chloride and sodium oxide.
Hazardous Polymerization: Has not been reported.
Section 11 - Toxicological Information
LD50 Oral - Rat - 3,550 mg/kg(Sodium chloride)
LC50 Inhalation - Rat - 1 h - > 42,000 mg/m3(Sodium chloride)
LD50 Dermal - Rabbit - > 10,000 mg/kg(Sodium chloride)
Carcinogenicity: Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Epidemiology: No information reported.
Teratogenic: An experimental teratogen.
Section 12 - Ecological Information
Toxicity to fish: LC50 - Lepomis macrochirus (Bluegill) - 5,840 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates:
NOEC - Daphnia (water flea) - 1,500 mg/l - 7 d(Sodium chloride)
LC50 - Daphnia magna (Water flea) - 1,661 mg/l - 48 h(Sodium chloride)
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Section 13 - Disposal Considerations
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
Section 14 - Transport Information
DOT (US): Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
ADR/RID: Not dangerous goods
Section 15 - Regulatory Information
USA Regulations:
SARA 302 Components: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
WHMIS (Canada): Not controlled under WHMIS (Canada).
Section 16 - Additional Information
Disclaimer:
***************************
Our company provides this
Sodium Chloride SDS information
sheet contained herein in good faith but makes
no representation as to its comprehensiveness or accuracy. This Sodium Chloride MSDS sheet is intended only as a guide to the appropriate
precautionary handling of the material by a properly trained person using
this product. Individuals receiving the information must exercise their
independent judgment in determining its appropriateness for a particular
purpose.
***************************
Sodium chloride manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
