|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Sodium Sulfate Sodium Sulphate Manufacturers, SDS MSDS Sheet
Sodium Sulfate Sulphate Anhydrous USP BP IP ACS Analytical Reagent AR FCC Food grade Manufacturers
Sodium Sulfate SDS MSDS Sheet, Material Safety Data Sheet
1. PRODUCT DESCRIPTION
Product Name: Sodium Sulfate or Sodium Sulphate
CAS Number: 7757-82-6 (Anhydrous) 7727-73-3 (Decahydrate)
EINECS EC Number: 231-820-9
Formula: Na2SO4 or Na2SO4.10H2O
Synonyms: Sodium sulfate decahydrate; glauber's salt; sulfuric acid sodium salt, decahydrate.
2. HAZARD IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according GHS & Regulation (EC) No 1272/2008
GHS Label Elements None |
Signal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Principle Components: Sodium Sulfate or Sodium Sulphate
CAS Number: 7757-82-6 (Anhydrous)
EINECS EC Number: 231-820-9
Percent 100%
4. FIRST AID MEASURES
Always seek medical attention after first aid measures are provided.
Emergency and First Aid Procedures:
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If swallowed, if conscious, give plenty of water and induce vomiting immediately as directed by medical personnel. Immediately call a physician.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Keep person warm, quiet, and get medical attention.
5. FIREFIGHTING PROCEDURES
Flash Point (Method Used): N/A
Extinguisher Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide..
Special Fire fighting Procedures: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus.
6. SPILL OR LEAK PROCEDURES
Steps to be Taken in Case Material is Released or Spilled: Ventilate area of spill of Sodium sulfate. Clean-up personnel should wear proper protective equipment. Avoid creating dust. Sweep or scoop up and containerize for disposal.
7. SPECIAL PRECAUTIONS
Precautions to be Taken in Handling or Storing: Store Sodium sulfate tightly closed in a cool, dry, well ventilated area suitable for general chemical storage. Provide appropriate exhaust ventilation at places where dust is formed. Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Hygroscopic.
8. SPECIAL PROTECTION INFORMATION
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation:
Local Exhaust: Yes
Mechanical (General): Yes
Protective Gloves: Rubber, neoprene, PVC, or equivalent.
Eye Protection: Splash proof chemical safety goggles should be worn at all times.
Other Protective Clothing or Equipment: Lab apron, eye wash, and safety shower.
9. PHYSICAL DATA
Molecular Weight: 142.04
Melting Point: 888C
Boiling Point: N/A
Specific Gravity (H2O=1): 2.7
Solubility in Water: 21%
Appearance and Odor: Sodium sulfate is white crystals or powder, no odor.
10. REACTIVITY DATA
Stability: Sodium sulfate is stable
Incompatibility (Materials to Avoid): Aluminum, strong acids, strong bases
Hazardous Decomposition Products: If heat to decomposition this product may evolve toxic oxides of sulfur.
Hazardous Polymerization: Will not occur
11. TOXICITY DATA
Toxicity Data: LD50 Oral - Mouse - 5989 mg/kg
Investigated as a tumorigen, mutagen, reproductive effector. No LD50/LC50 information found relating to normal routes of occupational exposure.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
12. ECOLOGICAL DATA
Toxicity to fish:
LC50 - Gambusia affinis (Mosquito fish) - 120 mg/l - 96 h
LC50 - Lepomis macrochirus - 4.380 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates:
EC50 - Daphnia magna (Water flea) - 2.564 mg/l - 48 h
Environmental Fate: When released into the soil, this material is expected to leach into groundwater. This material is not expected to significantly bio accumulate.
13. DISPOSAL INFORMATION
Waste Disposal Methods: Dispose in accordance with all applicable regulations.
14. TRANSPORT INFORMATION
DOT (US): Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
ADT/RID: Not dangerous goods
15. REGULATORY INFORMATION
USA Regulations:
SARA 311/312: Acute: No; Chronic: No; Fire: No; Pressure: No, Reactivity: No (Pure / Solid)
Section 313: No chemicals are reportable under Section 313.
TSCA 8(b) inventory: Sodium sulfate anhydrous
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
Canada WHMIS: Not controlled under WHMIS (Canada).
CAS# 7757-82-6 is listed on Canada's DSL List.
16. ADDITIONAL INFORMATION
Disclaimer:
***************************
Our company provides this
Sodium Sulfate Sulphate SDS information sheet contained
herein in good faith but makes no representation as to its
comprehensiveness or accuracy. This Sodium Sulfate MSDS sheet is
intended only as a guide to the appropriate precautionary handling of
the material by a properly trained person using this product.
Individuals receiving the information must exercise their independent
judgment in determining its appropriateness for a particular purpose.
***************************
Sodium Sulphate manufacturers
Sodium Sulfate manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
