|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Monoammonium Phosphate Monobasic Ammonium Phosphate Monobasic Manufacturers, SDS MSDS Sheet
Monoammonium Phosphate
Mono Monobasic Ammonium Phosphate Monobasic Manufacturers
Diammonium Phosphates Di Dibasic Ammonium Phosphate Dibasic
Manufacturers
MSDS of
Mono Monoammonium Monobasic Ammonium Phosphate Monobasic Manufacturers
MSDS of
Di Diammonium Dibasic Ammonium Phosphate Dibasic Manufacturers
Monoammonium Phosphate or Ammonium Phosphate Monobasic SDS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Mono Ammonium Phosphate, Primary ammonium phosphate; ammonium dihydrogen phosphate; ammonium biphosphate; phosphoric acid monoammonium salt, Monobasic-Ammonium Phosphate, Mono ammonium phosphate.
CAS No.: 7722-76-1
EINECS EC Number: 231-764-5
Molecular Weight: 115.04
Chemical Formula: NH4H2PO4
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according GHS & Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Ingredient: Monoammonium Phosphate or Ammonium Phosphate Monobasic
CAS No.: 7722-76-1
EINECS EC Number: 231-764-5
4. First Aid Measures
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention.
5. Fire Fighting Measures
Fire: Not considered to be a fire hazard. Fire may produce toxic fumes.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture: nitrogen oxides (NOx), Oxides of phosphorus
Special Information: In the event of a fire wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill of Mono Ammonium Phosphate. Avoid dust formation. Avoid breathing vapours, mist or gas. Do not let product enter drains. Wear appropriate personal protective equipment. Spills: Pick up and place in a suitable container for reclamation or disposal, using a method that does not generate dust.
7. Handling and Storage
Keep Mono Ammonium Phosphate in a tightly closed container, stored in a cool, dry, ventilated area. Protect Mono Ammonium Phosphate against physical damage. Isolate Monoammonium Phosphate from incompatible substances. Containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established for Mono Ammonium Phosphate.
Ventilation System: In general, dilution ventilation is a satisfactory health hazard control for Monoammonium Phosphate. However, if conditions of use create discomfort to the worker, a local exhaust system should be considered.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Monoammonium Phosphate is brilliant white crystals or granules.
Odor: Monoammonium Phosphate has faint acid odor.
Solubility: Mono Ammonium Phosphate is soluble 1 g/2.5 ml water.
Specific Gravity: 1.80 for Monoammonium Phosphate
pH: 4.2
% Volatile by volume @ 21C (70F): 0
Melting Point: 190C (374F)
10. Stability and Reactivity
Stability: Mono Ammonium Phosphate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Monoammonium Phosphate on burning may produce ammonia and oxides of phosphorus.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, Strong acids, Sodium hypochlorite.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Acute toxicity
LD50 Oral - rat - male and female - > 2.000 mg/kg
LD50 Dermal - rat - male and female - > 5.000 mg/kg
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
12. Ecological Information
Toxicity to fish: static test LC50 - Oncorhynchus mykiss (rainbow trout) - > 85,9 mg/l - 96 h
Environmental Toxicity: No information found for Mono Ammonium Phosphate
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of Mono Ammonium Phosphate may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose Monoammonium Phosphate container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
DOT: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated
ADR/RID: Not regulated
15. Regulatory Information
USA:
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No
SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No, Reactivity: No (Pure / Solid)
Canada WHMIS: Not controlled under WHMIS (Canada).
Disclaimer:
***************************
Our company provides this
Monoammonium
Phosphate or Ammonium Phosphate Monobasic SDS Sheet contained herein in good faith but makes
no representation as to its comprehensiveness or accuracy. This
Mono Ammonium
Phosphate or Monobasic Monoammonium Phosphate MSDS sheet is
intended only as a guide to the appropriate precautionary handling of the
material by a properly trained person using this product. Individuals
receiving the information must exercise their independent judgment in
determining its appropriateness for a particular purpose.
***************************
Monoammonium Phosphate, Monobasic Ammonium Phosphate Monobasic manufacturers:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
