|
Mubychem Group, is a mature manufacturing company since generations. Engaged in manufacture and supply of Pharmaceutical Intermediates and Excipients, Oil field & fracturing chemicals, Specialty tailor made grades of chemicals in India. With several manufacturing facilities in India and world wide contacts and toll manufacturers we are exporting to all the countries in the world.. |
The company and associated units have certificates & accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Commercial Pure & Pharmacopoeia IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
Sodium hydroxymethanesulfonate Sodium formaldehyde bisulfite manufacturers, SDS MSDS Sheet
Sodium hydroxymethanesulphonate Sodium formaldehyde bisulphite manufacturers SDS MSDS Sheet
MSDS of Sodium Formaldehyde Bisulfite Sodium
Formaldehyde Bisulphite
Sodium Formaldehyde Bisulfite
Bisulphite Sodium Hydroxymethanesulfonate Hydroxymethanesulphonate Manufacturers
Sodium Formaldehyde Bisulfite SDS MSDS Sheet, Sodium Hydroxymethanesulfonate Material Safety Data Sheet
Section 1 - Chemical Product Identification
Name: Formaldehyde Sodium Bisulfite.
Synonym: Formaldehyde sodium bisulfite; Formbis; Monosodium hydroxymethanesulfonate; Sodium hydroxymethanesulfonate; Sodium hydroxymethylsulfonate
Molecular Formula: HOCH2SO3Na
Molecular Weight: 134.09
CAS #: 870-72-4
EINECS EC Number: 212-800-9
Section 2 - Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according GHS & Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Hazards not otherwise classified (HNOC) or not covered by GHS:
May cause mild eye irritation.
May causes mild skin irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3 - Composition, Information on Ingredients
Chemical Name: Formaldehyde Sodium Bisulfite or Sodium Formaldehyde Bisulfite Sodium Hydroxymethanesulfonate
CAS #: 870-72-4
EINECS EC Number: 212-800-9
Percent: 95-100
Section 4 - First Aid Measures
Always seek medical advice after the first aid treatment.
Eyes: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.
Skin: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. Cold water may be used.
Ingestion: Do not induce vomiting. Get medical aid if irritation or symptoms occur.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Section 5 - Fire Fighting Measures
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Flash Point: 184 deg C ( 363.20 deg F)
Auto ignition Temperature: 500 deg C ( 932.00 deg F)
Section 6 - Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according law.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Section 7 - Handling and Storage
Handling: Use Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage: Store in a cool, dry place. Store in a tightly closed container.
Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits: Formaldehyde Sodium Bisulfite or Sodium Hydroxymethane Sulfonate or Sodium Formaldehyde Bisulfite is not listed by ACGIH, NIOSH, OSHA - Final PELs
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - Physical and Chemical Properties
Physical State: Sodium Formaldehyde Bisulfite or Sodium Hydroxymethane Sulfonate is solid.
Appearance: white
pH: 7 - 8 (100g/L aq sol)
Freezing/Melting Point: 200 deg C (decomoses)
Decomposition Temperature: 200 deg C
Solubility: 800 g/L (20C)
Molecular Formula: CH3NaO4S
Molecular Weight: 134.08
Section 10 - Stability and Reactivity
Chemical Stability: Hygroscopic; absorbs moisture or water from the air.
Conditions to Avoid: Incompatible materials, dust generation, exposure to moist air or water.
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - Toxicological Information
RTECS#: CAS# 870-72-4: PB2200000
LD50/LC50: CAS# 870-72-4 Oral, rat: LD50 = 3200
Carcinogenicity: CAS# 870-72-4: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Section 12 - Ecological Information
Ecotoxicity: No data available. No information available.
Environmental: No information available.
Section 13 - Disposal Considerations
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3.
RCRA P-Series: None listed.
RCRA U-Series: None listed.
Section 14 - Transport Information
DOT & ADR/IRD :
Not regulated.
IMDG :
Not regulated.
IATA: Not regulated.
Section 15 - Regulatory Information
USA:
TSCA: CAS# 870-72-4 is listed on the TSCA inventory.
Health & Safety Reporting List: None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules: None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs: None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances: None of the chemicals in this product have a TPQ.
Section 313: No chemicals are reportable under Section 313.
California Prop 65: California No Significant Risk Level: None of the chemicals in this product are listed.
WGK (Water Danger/Protection): CAS# 870-72-4: 1
Canada - DSL/NDSL: CAS# 870-72-4 is listed on Canada's DSL List.
Canada - WHMIS: This product has a WHMIS classification of D2B.
Disclaimer:
***************************
Our company provides this
Sodium Formaldehyde Bisulfite or Sodium
Hydroxymethanesulfonate SDS information sheet contained herein
in good faith but makes no representation as to its comprehensiveness or
accuracy. This Sodium Formaldehyde Bisulphite or Sodium
Hydroxymethanesulphonate MSDS information sheet is intended only as a
guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving
the information must exercise their independent judgment in
determining its appropriateness for a particular purpose.
***************************
Sodium hydroxymethanesulfonate manufacturers;
Sodium formaldehyde bisulfite manufacturers at:
MUBY CHEMICALS GROUP
DONGRI-CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 91-22-23726950, 91-22-23774610, 23723564.
e-mail: info@mubychem.com
